I am configuring LTE Mini-PIM using verion sim card on srx 320 for the first time and having issues to bring it up.
set interfaces cl-1/0/0 dialer-options pool 1 priority 1set interfaces cl-1/0/0 act-sim 1set interfaces cl-1/0/0 cellular-options sim 1 select-profile profile-id 1set interfaces cl-1/0/0 cellular-options sim 1 radio-access automatic
set interfaces ge-0/0/0 unit 0 backup-options interface dl0.0set interfaces dl0 unit 0 family inet negotiate-addressset interfaces dl0 unit 0 dialer-options pool 1set interfaces dl0 unit 0 dialer-options dial-string "*99***3#"
root# run show modem wireless profiles cl-1/0/0 slot 1Profile details Max profiles: 16 Default profile Id: 1
Profile 1: ACTIVE Valid: TRUE Access point name (APN): vzwinternet Authentication: None
root# run show modem wireless network cl-1/0/0LTE Connection details Connected time: 0 IP: 0.0.0.0 Gateway: 0.0.0.0 DNS: 0.0.0.0 Input bps: 0 Output bps: 0 Bytes Received: 0 Bytes Transferred: 0 Packets Received: 0 Packets Transferred: 0Wireless Modem Network Info Current Modem Status: Connecting Current Service Status: Normal Current Service Type: CS Current Service Mode: Unknown Current Band: WCDMA 850 Network: unknown Mobile Country Code (MCC): 0 Mobile Network Code (MNC): 0 Location Area Code (LAC): 0 Routing Area Code (RAC): 0 Cell Identification: 0 Access Point Name (APN): vzwinternet Public Land Mobile Network (PLMN): VerizonWirele Physical Cell ID (PCI): 284 International Mobile Subscriber Identification (IMSI): 31148030xxxxxxx International Mobile Equipment Identification (IMEI/MEID): 35907xxxxxxx Integrate Circuit Card Identity (ICCID): 891480000xxxxxxxxx Reference Signal Receiving Power (RSRP): 0 Reference Signal Receiving Quality (RSRQ): 0 Signal to Interference-plus-Noise Ratio (SiNR): 0 Signal Noise Ratio (SNR): 0 Energy per Chip to Interference (ECIO): 0
root# run show interfaces dl0.0 Logical interface dl0.0 (Index 85) (SNMP ifIndex 536) Flags: Up Point-To-Point SNMP-Traps 0x0 Encapsulation: ENET2 Dialer: State: Connecting, Dial pool: 1 Primary interface: ge-0/0/0.0 (Index 74) Dial strings: *99***3# Subordinate interfaces: cl-1/0/0 (Index 151) Activation delay: 0, Deactivation delay: 0 Initial route check delay: 120 Redial delay: 3 Callback wait period: 5 Load threshold: 0, Load interval: 60 Input packets : 168654 Output packets: 0 Security: Zone: Null Protocol inet, MTU: 1490 Flags: No-neighbor-learn, Sendbcast-pkt-to-re, Negotiate-Address
I have tried different dial string and chap authentication to n/a. I am aslo unable to find any debug commands to check logs. Any suggestions on config changes and/or logs to check? Thank you.
Seems to be stuck in the connecting state. Are you sure the sim is activated for the device id on the Verizon network?
Sometimes I've needed to call in when moving sim between hardware to have them bless the connection.
Thank you. I changed APN after calling verizon and it's connected after reboot. For a future, is there a log that can help in torubleshooting LTE connection?
Not sure where that logs, I generally use the same command you not above. The main log is messages and you can use the ? to see all the files currently on the device.
show log messages
show log ?
hi there, How are you? Please could you help us?! We need a list of modem LTE homologated from Juniper, where I can find it? Thanks a lot, Best Regards, Martha
Does anyone knows a way, to access the router remotely on the LTE IP address?
I've tried few diffrent ways, but I can't work it out.
Some LTE networks don't allow inbound initiated connections so if you have all the normal SRX configuration in place and it is not working you might want to check with your carrier.
Some don't allow it at all.
Some have an option to purchase static ip that will allow it.
Hello, are you using the supported wireless standard, if you could confirm please.
The LTE Mini-PIM supports the following wireless standards:
FCC Part 2
FCC Part 22
FCC Part 24, Part 27 and Part 90
RSS 129 and RSS 133, RSS 130, RSS 199, and RSS 139
RSS 132 and RSS 133
EN 301 511 GSM
EN 301 908-1
EN 301 908-2
The Certification and Engineering Bureau of Industry Canada (IC)
Radio Equipment (RE) Directive of the European Union
is it in always-on or dial on demand configuration ?
This document have sample configurations for different operating scenarios