SRX

Expand all | Collapse all

SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

Jump to Best Answer

karand02-09-2018 03:09

karand03-04-2018 04:19

Elevate03-04-2018 04:38

  • 1.  SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 02-08-2018 15:09

    Hi all,

     

    I just bought a used SRX220 with the SRX-MP-1VDSL2-A MPIM on eBay to use it as a home router (yes, i am crazy), and my ISP requires the VDSL Vectoring support, which was implemented in MPIM firmware v2.16. Currently my MPIM has the firmware version 2.10. My SRX220 has the JunOS version 12.1X46-D67 installed, but it seems that I need the separate firmware package in order to upgrade my mpim.

     

    I am a private person, so I have no Juniper service contract, support and/or JTAC access. Can anyone advise where I can get this firmware package?

     

    Thank you.



  • 2.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 02-08-2018 18:18

    Hi,

     

    could you share the output for the following:

     

    show system firmware
    show version

     

     



  • 3.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 02-08-2018 22:51

    Hi!

     

    root@fw> show system firmware
    Part             Type           Tag Current   Available Status
                                        version   version
    FPC 2
      PIC 0          VDSLBCM        10  2.10.0              OK
    Routing Engine 0 RE BIOS        0   2.8       2.8       OK
    Routing Engine 0 RE BIOS Backup 1   2.8       2.8       OK
    root@fw> show version
    Hostname: fw
    Model: srx220h-poe
    JUNOS Software Release [12.1X46-D67] 


  • 4.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring
    Best Answer

     
    Posted 02-08-2018 23:27

     

    Pick the jfirmware from here:

    ftp://ftp.juniper.net/pub/incoming/srx_firmare/

     

    1. Copy the firmware package from local downloaded location to your router path: /var/tmp/
    Once the firmware package is copied on the router, software add the Jfirmware package:  

    root@test> request system software add no-copy no-validate jfirmware-srxsme-12.1X46-D67.tgz
    This will install the firmware package on router

    2. Then firmware package should get listed on “show version”
                   
    3. Now, initiate the firmware upgrade through following CLI command:  

    root@test> request system firmware upgrade pic fpc-slot X pic-slot X

    4. Once the firmware initiated, check the status using:
    >show system firmware

    5. Once upgrade is successful, restart FPC 1 to make the upgraded firmware effective.  
    root@root> restart fpc x

     



  • 5.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 02-08-2018 23:34

    Hi!

     

    Thank you, but the "pub/incoming" directory is blank.



  • 6.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 02-08-2018 23:39
    Check after sometime (2 hours), (just uploaded) it takes a while to sync.


  • 7.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 02-09-2018 01:35

    Hi!

     

    Sorry, but there are still nothing in this folder after 2 hours. Could you please check?

     

    Thank you.



  • 8.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 02-09-2018 03:04

    Everything is OK now, thanks!

     

    root@fw> show system firmware
    Part             Type           Tag Current   Available Status
                                        version   version
    FPC 2
      PIC 0          VDSLBCM        10  2.16.0    2.16.0    OK
    Routing Engine 0 RE BIOS        0   2.8       2.8       OK
    Routing Engine 0 RE BIOS Backup 1   2.8       2.8       OK
    


  • 9.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 02-09-2018 03:09

     

    Glad to see that output.

    Cheers

     

     

     

     

     



  • 10.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-04-2018 04:10

    Hi,

     

    I have the same issue with a SRX110h-va, which should also work with firmware 2.16. Could you please re-upload the firmware?

    Currently I have 2.10 and the line is not synchronizing :

    root@fw> show system firmware
    Part Type Tag Current Available Status
    version version
    FPC 1
    PIC 0 VDSLBCM 10 2.10.0 OK
    Routing Engine 0 RE BIOS 0 2.1 2.8 OK
    Routing Engine 0 RE BIOS Backup 1 2.1 2.8 OK
    Routing Engine 0 RE FPGA 14 1.0.0 OK

     



  • 11.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 03-04-2018 04:19

    What junos version you're on?

     

     

     

     



  • 12.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-04-2018 04:38

    Junos version is 12.1X46-D71



  • 13.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-10-2018 01:15

    Hi Karan,

    Could you find a firmware for my Junos version?

     

    Regards,

    Guillermo



  • 14.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 03-10-2018 01:22

     

    Uploaded here:

    ftp://ftp.juniper.net/pub/incoming/srx_firmare/

     

    /volume/ftp/pub/incoming/srx_firmare]$ ls -l
    total 8964
     9134767 Mar 10 01:19 jfirmware-srxsme-12.1X46-D71.tgz

     

     



  • 15.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-16-2018 05:39

    I run Junos 12.348-D65.1 on my SRX110H2-VA. Could you upload the firmware for this version?

     

    Regards

    Denis



  • 16.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-21-2018 02:55

    Me too...

    I run Junos 12.348-D65.1 on my SRX110H2-VA. Could you upload the firmware for this version?

    I've allso Jtac acocunt but I can't find firmware version... just softwawre like:

    junos-srxsme-12.3X48-D65.1-domestic

     

    Any one can help me?

     

    Regards



  • 17.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 03-21-2018 03:18

     

    Here:

    ftp://ftp.juniper.net/pub/incoming/srx_firmare/

     

    /ftp/pub/incoming/srx_firmare$ ls -l

    Mar 21 03:10 jfirmware-srxsme-12.3X48-D65.1.tgz

     

     

     

     



  • 18.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-21-2018 03:29

    Hi,

    thank you for your prompt action.

    Right now directory is empty. May I wait some minutes?

     

    regards



  • 19.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-22-2018 02:29

    thank you! it's working.

    Updating firmware with 2.16 version on the PIC vDSL!

    Maybe I'm the first one, but I can confirm you all that:

    - Junos 12.348-D65.1 on my SRX110H2-VA. with:

    - junos-srxsme-12.3X48-D65.1-domestic

     

    In the other post about vDSL with tim italy provider in my case, I'll post the whole configuration with some details for make vDSL works.

     

    Regards



  • 20.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 04-05-2018 18:54

    Hi Karan,

     

    I have the exact same situation as 'alpharomeo', except that after I updated to the latest software:

     junos-srxsme-12.3X48-D65.1-domestic.tgz    the PIC firmware stayed on 2.10. 

     

    Did I miss entering a command?

     

    Is there a different firmware file that needs to be loaded?  Where would I find this, the only software available in the downloads section for the SRX110 is the   junos-srxsme...   family of software.  Previously it was mentioned that name of the firmware upgrade software was   jfirmware-srxsme...     

     

    Are there any other ways to upgrade the PIC firmware from   2.10  to  2.16   to support VDSL Vectoring?

     

    Could you please repost the firmware download links?

     

    Thanks,

     

     

    root@SRX110> show version

    Hostname: SRX110

    Model: srx110h2-va

    JUNOS Software Release [12.3X48-D65.1]

     

    root@SRX110> show system firmware

    Part             Type           Tag Current   Available Status

                                        version   version

    FPC 1           

      PIC 0          VDSLBCM        10  2.10.0              OK                

    Routing Engine 0 RE BIOS        0   2.5       2.8       OK                

    Routing Engine 0 RE BIOS Backup 1   2.5       2.8       OK                

    Routing Engine 0 RE FPGA        14  1.0.0               OK                

     



  • 21.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 04-05-2018 20:39

    HI,

     

    jfirmware package at download site is still work in progress (https://www.juniper.net/support/downloads/?p=junos-srx).

    Meanwhile, I'll repost jfirmware packages at ftp for your download.

     

     



  • 22.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 04-08-2018 22:09

    Hi Karan,

    Maybe you havnt uploaded the firmware yet, or it hasnt synchronised yet. 

    I cant anything at   ftp://ftp.juniper.net/pub/incoming/

    Is that the correct address?

    Thanks,



  • 23.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 04-16-2018 16:24

    Hi Karan, just wanted to give an update.

    After I updated with jfirmware-srxsme-12.3X48-D65.1.tgz my firmware revision went upto 2.19, and is currently working perfectly.  🙂

     

    Thanks!



  • 24.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 05-05-2018 03:15

    Hi Karan,

    Are you able to provide me this updated jfirmware package to? For SRX110

    Thanks



  • 25.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 05-08-2018 07:01
    Can you please re-upload jfirmware-srxsme-12.1X46-D67.tgz to ftp.juniper.net? It appears to be gone.


  • 26.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 05-30-2018 15:50

    I am also looking for the firmware for SRX110. 12.1X46D65 or 75 or anyother...Can some one share.



  • 27.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 05-31-2018 03:07

    These normal SRX110 firmware are hosted on the support site here.

     

    https://www.juniper.net/support/downloads/?p=srx110

     

    If you do not have current access follow the deny link to create an "Admin Service Case" to activate your download rights.

     



  • 28.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 07-19-2018 17:21

    Hi,

     

    Is there any chance someone could point me in the direction of a SRX110 2.16 PIC firmeware for junos 12.3X48 please?

     

    I can see it has been posted to an FTP site previously, would be most grateful if anyone was able to upload it there again.

     

    Thanks!

     

     



  • 29.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-15-2018 02:23

    Hi, 

     

    Is it possible to share both 

     

    jfirmware-srxsme-12.3X48-D65.1.tgz

     

     and 

     

    jfirmware-srxsme-12.1X46-D67.tgz 

     

    in ftp  ftp://ftp.juniper.net/pub/incoming/ ?

     

    Appreciate for your assistance.



  • 30.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-21-2018 18:56

    Hi, 

     

    I am also looking for jfirmware-srxsme-12.1X46-D67.tgz for my srx100. Is it possible to have this uploaded to the FTP? It's not currently downloadbale from the downloads page.

     

    Cheers



  • 31.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 09-22-2018 03:50

    Renza7,

    12.1X46-D67 is still available on the main download site.

     

    https://support.juniper.net/support/downloads/

     

    At the top select srx100

    Then change the version pull down to the 12.1x46

    D67 is available here

     



  • 32.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-22-2018 04:08

    Thanks for your reply. I can download the junos release from that page, but not the corresponding jfirmware release. I am looking for the jfirmware to update my dsl PIM firmware. thanks

     

    edit: sorry previous post had a typo. I have a SRX110.



  • 33.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 09-22-2018 19:08

    Today is your lucky day.. get firmware from ftp:

    ftp://ftp.juniper.net/pub/incoming/ 

     

     



  • 34.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-22-2018 19:56

    Thanks for the link Karand,  but there doesn't appear to be any files available there to download



  • 35.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 09-22-2018 20:29

    it takes a while for ftp to sync up..check after sometime..

     

     



  • 36.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-25-2018 12:59

    @karand

     

    I am currently running JUNOS Software Release [12.3X48-D70.3]

     

    However, my firmware is currently showing:

     

    Part Type Tag Current Available Status
    version version
    FPC 1
    PIC 0 VDSLBCM 10 2.10.0 OK
    Routing Engine 0 RE BIOS 0 2.5 2.8 UPGRADED SUCCESSFULLY
    Routing Engine 0 RE BIOS Backup 1 2.5 2.8 OK
    Routing Engine 0 RE FPGA 14 1.0.0 OK

     

    Please may you upload the jfirmware for SRX110H2-VA which works with this junos to the ftp?.

     

    Many Thanks.



  • 37.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-27-2018 09:16

    *bump*

     

    Any updates on the question above?



  • 38.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 11-30-2018 07:18

    Hi,

     

    i have a SRX220 on latest release. but need the VDSL firmware update.
    JUNOS Software Release [12.3X48-D75.4]

     

    FPC 1
    PIC 0 VDSLBCM 10 2.10.0 OK
    Routing Engine 0 RE BIOS 0 2.5 2.8 OK
    Routing Engine 0 RE BIOS Backup 1 2.5 2.8 OK

     

    could you please tell me how i can get of this please.



  • 39.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 11-30-2018 21:10

    Hi,

     

    I had a check with Junos Release Team to post the firmware onto the download page so that authorized user can download them however due to S/W polices & other security measurements, the SRX firmware couldn't be posted to download page for certain specfic releases. You will need to log a Case/Ticket with JTAC to in order to get the firmware for your desired JUNOS version/release. In case if you do not hold any Support contract with Juniper for your Juniper product, you can reach out to Juniper Customer Care Support Team and request for one time courtesy support case to download firmware.

     

     

     

     

     



  • 40.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 09-30-2018 00:46

    Hi,

     I am also looking for the Firmware Update for the VDSLBCM PIC and Can't find it at the Download site.

    Update from Junos are Complete:

    Model: srx220h2
    JUNOS Software Release [12.3X48-D75.4]

    Part             Type           Tag Current   Available Status
                                        version   version
    FPC 1
      PIC 0          VDSLBCM        10  2.7.0               OK
    FPC 2
      PIC 0          VDSLBCM        10  2.10.0              OK

     

    with the current version is maximum 10mbit avail in VDSL thats a litle pity

    so i hope you can make my day also lucky and reupdate the jfirmware to ftp?

     

    Kind regards

    Alexs



  • 41.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 10-14-2018 05:57

    Also interested on an update to this if there is one. I have SRX210 12.1X46-D81 missing the 2.16 jfirmware:

     

    PIC 0          VDSLBCM        10  2.10.0              OK                

    Routing Engine 0 RE BIOS        0   2.8       2.8       OK                

    Routing Engine 0 RE BIOS Backup 1   2.8       2.8       OK                

     

    It's been a while since @Karan said they were working on getting this into the downloads so hopefully it's close...



  • 42.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-22-2018 20:58

    Would it be possible to re-post that firmware again?  I'm in a similar situation have VDSLBCM 2.10.0, and have just moved from ADSL to VDSL w/Vectoring requirement (.au NBN FTTN).



  • 43.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-23-2018 02:00

    Hi,

    don't have direct access to the firmware side. Ask to the community.

    Better also that software and firmware will be alligment. Than... write also your current software realese.

     

    Many regards



  • 44.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-23-2018 02:30

    Hey alfaromeo,  everyone,

    Good point 🙂

    I'm running a SRX220H2 with 12.3X48-D60.2.

     

    If anyone watching from Juniper could (continue) to take sympathy on those of us who have had mandatory access network changes which are incompatible with the older VDSL firmware, it would be very much appreciated 🙂

    Thanks!

     

     

     



  • 45.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 03-23-2018 02:38

    Hi All,

     

    We're working to getting jfirmware package to our download site (https://www.juniper.net/support/downloads) for everyone to pick the required jfirmware. This is currently under progress. We'll update once the firmware packages are post for download.

     

     

     

     

     

     

     



  • 46.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

    Posted 03-23-2018 02:47

    Hi Karan,

     

    Was going to ask if it would be possible to get the firmware published here (https://www.juniper.net/support/downloads/?p=junos-srx), as the files for the relevant SRX300 series devices seem to already be there. 

     

    Thanks!



  • 47.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

     
    Posted 03-23-2018 03:11

    Hi Andrew,

     

    Yes, we're aware. Will add for other platform/series as well.

     

     



  • 48.  RE: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring