SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Fabric Monitoring

    Posted 06-05-2017 08:31

    Is it safe to enable chassis cluster fabric monitoring on production firewalls with no impact to service?


    #fabricmonitoring


  • 2.  RE: Fabric Monitoring

     
    Posted 06-05-2017 19:53

    Hello,

     

    As long as your fabric is healthy, in my opinion it should not have any impact.

     

    Regards,

     

    Rushi



  • 3.  RE: Fabric Monitoring
    Best Answer

    Posted 06-06-2017 03:21

    Before application run

     

    show chassis cluster interfaces

     

    And be sure there are no errors or warnings in progress.  If you enable when in some inconsistent state you may trigger failover events.

     

    I would still do it at a low traffic period to be cautious.



  • 4.  RE: Fabric Monitoring

    Posted 06-06-2017 08:22
    Thank you all for confirming.