SRX

Expand all | Collapse all

Packet mode interface failover

Jump to Best Answer
  • 1.  Packet mode interface failover

    Posted 10-06-2017 08:43

    Hi,

     

    We have two SRX in packet mode. their are two ISP link connected on per gateway for redundancy.

    ISP1 is connected on ge-0/0/0 interface and ISP2 is connected on ge-0/0/1 interface.

     

    Here if ISP1(Primary) down ISP2(Secondary) interface should start communicate. once ISP1 interface come up that should again become primary.

     

    Kindly suggest configuration KB.

     

    Thank you...


    #SRX


  • 2.  RE: Packet mode interface failover
    Best Answer

     
    Posted 10-06-2017 10:39

    You have 2 ISP connected to each SRX? If so you can use IP-Monitoring feature to failover traffic between the links.

     

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB25052

     

     

    If you are saying ISP1 is on SRX1 and ISP2 on SRX2, ignore this.