SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Flow mode and packet mode combination for cluster

Jump to Best Answer
This thread has been viewed 1 times
  • 1.  Flow mode and packet mode combination for cluster

    Posted 03-01-2017 07:12

    Hi,

     

    The customer has 3 ISP link(1 lease line (BGP), 1 MPLS and 1 P2P) and one internal VLAN.

    The customer is expecting flow base clustering for HA and packet mode configuration for ISP and VLAN.

     

    Can someone please guide my, how to achieve this requirement on SRX 340 gateway.

     

    Thanks.


    #srx340HA


  • 2.  RE: Flow mode and packet mode combination for cluster
    Best Answer

     
    Posted 03-01-2017 07:24
    You may use selective packet mode - ref https://kb.juniper.net/KB26757