SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Can you cluster SRX 240H2 and SRX 240H ?

This thread has been viewed 1 times
  • 1.  Can you cluster SRX 240H2 and SRX 240H ?

    Posted 06-08-2016 07:11

     

    Hi all, 

     

    is there any problem with the below setup?

     

    run show chassis hardware detail
    node0:
    --------------------------------------------------------------------------
    Hardware inventory:
    Item Version Part number Serial number Description
    Chassis XXXXXXXX SRX240H2
    Routing Engine REV 14 750-043609 XXXXXX RE-SRX240H2
    usb0 (addr 1) DWC OTG root hub 0 vendor 0x0000 uhub0
    usb0 (addr 2) product 0x005a 90 vendor 0x0409 uhub1
    usb0 (addr 3) ST72682 High Speed Mode 64218 STMicroelectronics umass0
    FPC 0 FPC
    PIC 0 16x GE Base PIC
    FPC 1 REV 06 750-032730 XXXXXXX FPC
    PIC 0 1x GE High-Perf SFP mPIM
    Xcvr 0 REV 01 740-011783 XXXXXX SFP-LX10
    Power Supply 0

     

    node1:
    --------------------------------------------------------------------------
    Hardware inventory:
    Item Version Part number Serial number Description
    Chassis XXXXXXXXXX SRX240H
    Routing Engine REV 45 750-021793 XXXXXXXXXX RE-SRX240H
    da0 999 MB ST72682 Nand Flash
    usb0 (addr 1) DWC OTG root hub 0 vendor 0x0000 uhub0
    usb0 (addr 2) product 0x005a 90 vendor 0x0409 uhub1
    usb0 (addr 3) ST72682 High Speed Mode 64218 STMicroelectronics umass0
    FPC 0 FPC
    PIC 0 16x GE Base PIC
    FPC 1 REV 06 750-032730 XXXXXXXX FPC
    PIC 0 1x GE High-Perf SFP mPIM
    Xcvr 0 REV 01 740-011783 XXXXXXX SFP-LX10
    Power Supply 0

    {primary:node0}[edit]


    #SRX240H2
    #SRX240H
    #240
    #cluster


  • 2.  RE: Can you cluster SRX 240H2 and SRX 240H ?
    Best Answer

    Posted 06-08-2016 07:22

    Hi Alex,

     

    The difference between two boxes is that SRX240h ihas 1 Gig RAM , whereas SRX240H2 has 2 gig RAM.

    As it is advisable from Juniper that hardware and software should be exact to form a cluster , combination of

    these two models top form a cluster may result into abnormal behaviour , so i would suggest you not to use

    these two devices as a cluster.

    I have seen the setup working fine for a while , however may turn out to be a issue after months.

     

    Regards

    Hemant