SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Filter Based Forwarding to Specific Outgoing Interface on SRX

Jump to Best Answer
This thread has been viewed 0 times
  • 1.  Filter Based Forwarding to Specific Outgoing Interface on SRX

    Posted 02-28-2016 07:31

    Hi,

     

     

    On MX series we can achieve filter based forwarding by just defining the next-interface in the then stanza according to this link

     

    http://www.juniper.net/techpubs/en_US/junos12.2/topics/topic-map/filter-based-forwarding-policy-based-routing.html#jd0e330

     

    Is there anyway to achieve this on SRX ? I don't want to use routing-instance.

     

    Looking forward to hear.

     

    Thanks,

    MYN

     

     


    #filterbasedforwarding
    #SRX
    #OutgoingInterface
    #fbf


  • 2.  RE: Filter Based Forwarding to Specific Outgoing Interface on SRX
    Best Answer

    Posted 02-29-2016 02:10
    I don't think this is possible on the SRX. The outgoing interface won't match the one in the session table if you do this, have to try it to be sure!