SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  show chassis hardware on SRX100B not working

    Posted 11-23-2013 18:40

    Hi Everyone,

     

        I am trying to run the command "show chassis hardware" on a SRX100B router. However, when I do I get the error message below:

     

    root@rusny1001> show chassis hardware
    error: the chassis-control subsystem is not running

    root@rusny1001>

     


    Can you guys please explain the issue I am having? Thank you


    #srx100
    #routing
    #Juniper
    #router


  • 2.  RE: show chassis hardware on SRX100B not working
    Best Answer

     
    Posted 11-23-2013 19:44

    Hi Victor

     

    It appears that chassis-control process is not running on your SRX-100 box.

    Could you restart chassis-control process and check if it resolves the issue?

     

    CLI:

     

    restart chassis-control

     

    Regards,

    Raveen



  • 3.  RE: show chassis hardware on SRX100B not working

    Posted 11-23-2013 20:45

    There may be some problem with chassis-control daemon response, you can view chassisd and messages log files to sort out the issue by using the commands 

     

     

    file show /var/log/chassisd

    file show /var/log/messages

     Log files entries can be further interpreted by using the command help syslog ------------------------(error code) that you found in log files.

    You may try to give restart to chassis-control daemon by issuing command  restart chassis-control

     

    You may try Junos upgrade on the device that may also resolve the issue 

     

    Please mark this as accepted solution if it works for you

    A Kudos is a good way of appreciation

     

    Kashif Nawaz

    JNCIP-Sec, JNCIS-Sec,JNCIS-Ent,JNCIA-Junos



  • 4.  RE: show chassis hardware on SRX100B not working

    Posted 02-10-2014 22:28

    please letme know what is the difference between "sh chassis" and  "sh hardware"

    is there any difference between hadware and chassis ?



  • 5.  RE: show chassis hardware on SRX100B not working

    Posted 02-11-2014 11:09

    sh hardware is not a valid operational command.