SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Yellow Alarm on firewall Juniper Please Help

    Posted 06-16-2014 06:58

    Hi dear All I have some problem We Have Two Juniper SRX240   in cluster and Zabbix Monitoring System got this message that "Yellow Alarm on firewall Juniper" why it and how can i solve this problem Thanks in Advance

     

    P.S Two Juniper runs the same JunOs


    #YellowAlarmonfirewallJuniper


  • 2.  RE: Yellow Alarm on firewall Juniper Please Help

    Posted 06-16-2014 07:05

    Hi ,

     

    Share the show chassis alarms output

     

    Regards,

    rparthi



  • 3.  RE: Yellow Alarm on firewall Juniper Please Help

    Posted 06-16-2014 23:17

    Dear Rparthi 

    i have run show show chassis alarms nothing but then run  system alarms i got this message

     

    razmik@baghdasaryan> show system alarms
    node0:
    --------------------------------------------------------------------------
    2 alarms currently active
    Alarm time               Class  Description
    2014-01-10 18:57:03 AMT  Minor  Autorecovery information needs to be saved
    2014-01-10 18:57:02 AMT  Minor  Rescue configuration is not set

    node1:
    --------------------------------------------------------------------------
    2 alarms currently active
    Alarm time               Class  Description
    2014-01-10 18:58:01 AMT  Minor  Autorecovery information needs to be saved
    2014-01-10 18:58:01 AMT  Minor  Rescue configuration is not set



  • 4.  RE: Yellow Alarm on firewall Juniper Please Help
    Best Answer

    Posted 06-16-2014 23:24

    Hi Razmik,

     

    You are seeing the minor alarams becuase you did not have saved the rescue configuration.

     

    A rescue configuration allows you to define a known working configuration or a configuration with a known state that you can roll back to at any time. This alleviates the necessity of having to remember the rollback number with the rollback command. You use the rescue configuration when you need to roll back to a known configuration or as a last resort if your router or switch configuration and the backup configuration files become damaged beyond repair.

     

    To save the most recently committed configuration as the rescue configuration so that you can return to it at any time, issue the request system configuration rescue save command:

    user@host> request system configuration rescue save
     
    Please refer the below link for more details.
     
     
    Regards,
    Deepak


  • 5.  RE: Yellow Alarm on firewall Juniper Please Help

    Posted 06-17-2014 02:38

    Hi  Razmik,

     

    Please run the following command to save the current status of disk partitioning, configuration, and licenses for autorecovery

     

    request system autorecovery state save


    Sample Output
    request system autorecovery state save

    user@host> request system autorecovery state save
    Saving config recovery information
          Saving license recovery information
          Saving bsdlabel recovery information

     

    http://www.juniper.net/techpubs/en_US/junos12.1/topics/reference/command-summary/request-system-autorecovery-state.html

     

     

    Regards,
    rparthi

     

    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    [Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too] .....



  • 6.  RE: Yellow Alarm on firewall Juniper Please Help

    Posted 06-17-2014 22:43

    Thanks R



  • 7.  RE: Yellow Alarm on firewall Juniper Please Help

     
    Posted 06-17-2014 13:48

    I like to end any initial deploy of a SRX or Junos upgrade with these three procedures.

     

    request system configuration rescue save
    request system autorecovery state save
    request system snapshot slice alternate


  • 8.  RE: Yellow Alarm on firewall Juniper Please Help

    Posted 06-17-2014 22:45

    Thanks

    request system configuration rescue save
    request system autorecovery state save
     
    Thanks