Hi, I've a EX4550 (JUNOS 12.3R4.6) switch with one AE interface. This AE has vlan-tagging enabled. All units on this AE interface are family inet. This AE connects to our backbone. Now I've one interface, ge-0/0/3, which needs to be 'bridged' to ae1.300. So ae1.300 needs family ethernet-switching. The thing is, the following config does not work, but it does pass 'commit check':
interfaces ge-0/0/3 {
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members vlan300;
}
}
}
}
ae1 {
vlan-tagging;
aggregated-ether-options {
lacp {
passive;
}
}
unit 300 { << Doesn't seem to work
vlan-id 300;
family ethernet-switching;
}
unit 370 { << Works
vlan-id 370;
family inet {
address 1.2.3.82/29;
}
}
}
Anyone an idea? Is it possible? If so, what am I doing wrong? ;o)
Thanks!
Onno.