Hi all,
I am installing a new firmware to an MX80 but have the below warnings.
Can I continue installing the firmware or is there something I should fix first?
--------------------------------------------------------------------------------------------------------------
>request system software add /var/tmp/jinstall-ppc-21.2R3-S5.4-signed.tgz no-validate
Installing package '/var/tmp/jinstall-ppc-21.2R3-S5.4-signed.tgz' ...
Verified jinstall-ppc-21.2R3-S5.4.tgz signed by PackageProductionECP256_2023 method ECDSA256+SHA256
Adding jinstall-ppc...
WARNING: jservices-alg package is missing
WARNING: jservices-cpcd package is missing
WARNING: jservices-crypto-base package is missing
WARNING: jservices-ipsec package is missing
WARNING: jservices-jflow package is missing
WARNING: jservices-nat package is missing
WARNING: jservices-rpm package is missing
WARNING: jservices-sfw package is missing
WARNING: This package will load JUNOS 21.2R3-S5.4 software.
WARNING: It will save JUNOS configuration files, and SSH keys
WARNING: (if configured), but erase all other files and information
WARNING: stored on this machine. It will attempt to preserve dumps
WARNING: and log files, but this can not be guaranteed. This is the
WARNING: pre-installation stage and all the software is loaded when
WARNING: you reboot the system.
Saving the config files ...
NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install
Installing the bootstrap installer ...
WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the
WARNING: 'request system reboot' command when software installation is
WARNING: complete. To abort the installation, do not reboot your system,
WARNING: instead use the 'request system software delete jinstall'
WARNING: command as soon as this operation completes.
Saving package file in /var/sw/pkg/jinstall-ppc-21.2R3-S5.4-signed.tgz ...
Saving state for rollback ...
--------------------------------------------------------------------------------------------------------------
> show version
Hostname: sdc1.eq5.fra
Model: mx80
Junos: 15.1R7.9
JUNOS Base OS boot [15.1R7.9]
JUNOS Base OS Software Suite [15.1R7.9]
JUNOS Crypto Software Suite [15.1R7.9]
JUNOS Packet Forwarding Engine Support (MX80) [15.1R7.9]
JUNOS Web Management [15.1R7.9]
JUNOS Online Documentation [15.1R7.9]
JUNOS Services Application Level Gateways [15.1R7.9]
JUNOS Services Jflow Container package [15.1R7.9]
JUNOS Services Stateful Firewall [15.1R7.9]
JUNOS Services NAT [15.1R7.9]
JUNOS Services RPM [15.1R7.9]
JUNOS Services Captive Portal and Content Delivery Container package [15.1R7.9]
JUNOS Macsec Software Suite [15.1R7.9]
JUNOS Services Crypto [15.1R7.9]
JUNOS Services IPSec [15.1R7.9]
JUNOS Kernel Software Suite [15.1R7.9]
JUNOS Routing Software Suite [15.1R7.9]
JUNOS Installation Software [21.2R3-S5.4]
--------------------------------------------------------------------------------------------------------------
Thanks
------------------------------
ULAS AYDIN
------------------------------