Hello,
we've deployed a vSRX to test some VPLS scenarios.
Currently it seems to be working between a SRX320 and the vSRX if we are only using a seperate vSwitch on the vSRX.
If we change the interface to a productive vSwitch all configured vlans are unreachable.
It seems like to be a loop configured - but we were unable to find it.
Currently we are using this configuration:
root@FW-02# show routing-instances
VPLS {
protocols {
vpls {
site SITE02 {
site-identifier 2;
}
no-tunnel-services;
}
}
interface ge-0/0/1.601;
interface ge-0/0/1.605;
interface ge-0/0/1.614;
instance-type vpls;
route-distinguisher 10.255.0.98:100;
vrf-target target:100:100;
root@FW02# show interfaces ge-0/0/1
description "VPLS INT";
vlan-tagging;
encapsulation extended-vlan-vpls;
unit 601 {
vlan-id 601;
}
unit 605 {
vlan-id 605;
}
unit 614 {
vlan-id 614;
}
}
Can you please help?
Best Regards
------------------------------
FLORIAN
------------------------------