vSRX

 View Only
last person joined: 5 days ago 

Ask questions and share experiences with vSRX Virtual Firewall deployments and how to scale firewall protection.
  • 1.  vSRX 3.0 - VLAN tagging not working on Hyper-V

    Posted 06-07-2022 16:23
    Hello Team,

    We are currently trying to run vSRX 3.0 on Hyper-V but are facing a problem with vlan tagging when running vSRX version 21.4R1.12 and 22.1R1.10.

    VLAN tagging works correctly when running vSRX version 20.2.R1.10, however with this the cluster failover does not work at all i.e. failover from primary to secondary node does not happen.

    Both these features VLAN tagging and HA cluster are important and required, so any assistance or insights into this would be highly appreciated.

    Thanks


  • 2.  RE: vSRX 3.0 - VLAN tagging not working on Hyper-V

    Posted 06-09-2022 13:28
    Raised a case with Juniper Support - they suggested to use the recommended/suggested version from below link.

    https://supportportal.juniper.net/s/article/Junos-Software-Versions-Suggested-Releases-to-Consider-and-Evaluate?language=en_US

    At the moment, the suggested version is 20.4R3-S1.3.  After using this version, both vlan tagging and cluster failover is working for vSRX on Hyper-V.

    Thanks.