View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  Vlan issue on EX 3300

    Posted 08-08-2022 12:53
    Edited by ankurv 08-08-2022 12:54
    I have an interface on EX3300 configured as an access port on vlan B however the device connected to that interface is still getting ip address via DHCP server on VLAN A.

    Switch configured for VLAN B
    set interfaces ge-1/0/40 unit 0 family ethernet-switching vlan members B

    Device connected to the interface still getting IP address from VLAN A
    show ethernet-switching table |match XX:XX:XX:XX:XX:XX
    A               XX:XX:XX:XX:XX:XX Learn         ge-1/0/40.0

    I cleared arp entries, deactivated and re-activated the interface but still the issue persists.


  • 2.  RE: Vlan issue on EX 3300

    Posted 08-08-2022 20:21
    What is the full configuration for interface ge-1/0/40
    show configuration | display set | match ge-1/0/40

    Do any vlans have all interfaces assigned
    show configuration vlans | display set | match all

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)

  • 3.  RE: Vlan issue on EX 3300

    Posted 08-09-2022 09:29
    Upgraded the switch last night and that seems to have solved the problem. The switch was displaying "booted from backup junos" but all partitions had same firmware version on them.