can't assign a mpls family on RVI....
interfaces vlan unit 967
family inet {
address 192.168.128.102/30;
}
family iso {
mtu 1497;
}
family mpls {
mtu 1546;
}
commit and...
[edit interfaces vlan unit 967]
'family'
family mpls not valid on VLAN interface
error: configuration check-out failed
Without this family I have very tiny mpls routing table:
cisco@JUN-EX4550-ATS-54# run show route table mpls.0
mpls.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 14:58:59, metric 1
Receive
1 *[MPLS/0] 14:58:59, metric 1
Receive
2 *[MPLS/0] 14:58:59, metric 1
Receive
13 *[MPLS/0] 14:58:59, metric 1
Receive
16 *[VPN/0] 14:58:57
to table ETTH-MGMT.inet.0, Pop
17 *[VPN/0] 14:58:57
to table IPDSLAM.inet.0, Pop
18 *[VPN/0] 14:58:57
to table IPTV.inet.0, Pop
19 *[VPN/0] 14:58:57
to table SIP-KMR.inet.0, Pop
299776 *[L2CKT/7] 00:05:46
> via ge-0/0/24.600, Pop Offset: 4
That's why I've used sub-interface for mpls/ldp neighbor.