Hi
I try to set up interface range to define all my LACP to mode "active".
But it seems doesn't working...
here is the simple base config:
interface-range AGGREGATS_LACP_ACTIVE_TRUNKS {
member ge-6/0/15;
}
-> This is working
But when I try to put this config:
[edit interfaces interface-range AGGREGATS_LACP_ACTIVE_TRUNKS]
+ aggregated-ether-options {
+ lacp {
+ active;
+ }
+ }
I get this error...
commit
error: [ interfaces interface-range AGGREGATS_LACP_ACTIVE_TRUNKS aggregated-ether-options] not accepted, as interface-range 'AGGREGATS_LACP_ACTIVE_TRUNKS' has interface 'ge-6/0/15'
error: copy of interface-range hierarchy failed
error: interface-ranges expansion failed
On the ge-6/0/15, I have configure nothing at all ....
When I've a lott to this KB: (http://www.juniper.net/techpubs/en_US/junos10.1/topics/reference/configuration-statement/interfaces-interfaces-ex-series.html), I see that the aggregated-ether-options isn't listed in the available command...
So, supported or not, to use interface range with aggregated-ether-options?
Regards