show interfaces ge-0/0/2 extensive
Physical interface: ge-0/0/2, Enabled, Physical link is Up
Interface index: 227, SNMP ifIndex: 506, Generation: 230
Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Auto, BPDU Error: None, MAC-REWRITE Error: None,
Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled,
Remote fault: Online, Media type: Copper, IEEE 802.3az Energy Efficient Ethernet: Disabled
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Link flags : None
CoS queues : 8 supported, 8 maximum usable queues
Hold-times : Up 0 ms, Down 0 ms
Current address: 64:64:9b:a1:e9:45, Hardware address: 64:64:9b:a1:e9:45
Last flapped : 2016-07-31 07:46:22 CDT (2w4d 08:07 ago)
Statistics last cleared: Never
Traffic statistics:
Input bytes : 591598274183 0 bps
Output bytes : 11834549437 5112 bps
Input packets: 393146163 0 pps
Output packets: 132429034 9 pps
IPv6 transit statistics:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Input errors:
MAC statistics: Receive Transmit
Total octets 591598274183 11834549437
Total packets 393146163 132429034
Unicast packets 393097251 116331020
Broadcast packets 9618 15062057
Multicast packets 39294 1035957
CRC/Align errors 0 0
FIFO errors 0 0
MAC control frames 0 0
MAC pause frames 0 0
Oversized frames 0
Jabber frames 0
Fragment frames 0
Code violations 0
Logical interface ge-0/0/2.0 (Index 166) (SNMP ifIndex 507) (Generation 231)
Flags: Up SNMP-Traps 0x80004000 Encapsulation: ENET2
Traffic statistics:
Input bytes : 5417578
Output bytes : 105179152
Input packets: 46573
Output packets: 890130
Local statistics:
Input bytes : 5417578
Output bytes : 105179152
Input packets: 46573
Output packets: 890130
Transit statistics:
Input bytes : 0 0 bps
Output bytes : 0 0 bps
Input packets: 0 0 pps
Output packets: 0 0 pps
Protocol eth-switch, Generation: 252, Route table: 0
Question:
From the above verification command, the traffic statistics has input bytes of 591598274183 whereas the under the logical interface the input bytes is 5417578. What do the two numbers signify ? what is the correlation between the numbers ?
On the traffic statistics heading what does the 3rd column signify ? I see a 0 bps in the input bytes, but don’t know what it relates to.
Does the total packets times the MTU equal to the total octects ? In our case 393146163 X 1514 = 595223290782 .
How do you calculate the total average of incoming and outgoing traffic on a particular switch ?
Your answers would be highly appreciated.