hello guys, i had this config below I just try it by hand but please correct me if I am wrong:
Screen OS config below:
set interface ethernet1 ip 192.168.15.254/24
set interface ethernet1 nat
SRX: (i'm not sure whether this is the correct translation for the above code)
set rule-set rs1 from zone trust
set rule-set rs1 to zone untrust
set rule-set rs1 rule r1 match source-address 0.0.0.0/0
set rule-set rs1 rule r1 match destination-address 0.0.0.0/0
set rule-set rs1 rule r1 then source-nat interface
set policy internet-access match source-address any destination-address any application any
set policy internet-access then permit
Any input is greatly appreciated?
Is there a JunOS simulator that can be downloaded?
Thanks.