Junos OS

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about Junos OS.

  • 1.  show chassis power command on MX104

    Posted 01-21-2021 04:59
    Hi,

    I have an MX104 for which I want to see the current power usage. It seems the command show chassis power doesn't work on MX104. Is there any other way I can find out the current usage from the CLI?


    --- JUNOS 17.3R3-S2.2 built 2018-11-07 01:06:28 UTC
    user@MX104> show chassis power
    error: command is not valid on the mx104


    Thanks in advance!

    Erac


  • 2.  RE: show chassis power command on MX104
    Best Answer

     
    Posted 01-21-2021 05:48
    Hello,

    on MX104 you cannot see the power usage. The similar command for MX104 is:
    show chassis environment pem

    But with this command, you can just see the Voltage on this platform.

    ------------------------------
    ------------------------------
    If my answer provides the solution, please mark my post as "Best Answer".
    If you think my answer helps, please "Recommend" my post.
    ------------------------------

    Original Message


  • 3.  RE: show chassis power command on MX104

    Posted 02-02-2021 11:52
    Hi,

    Thanks for this information! I will have to measure with a power meter instead in that case then. 

    Best regards
    Erac
    Original Message


  • 4.  RE: show chassis power command on MX104

    Posted 03-20-2025 05:49

    Hi F1ght3r,

    How can we see the power is being comsumed?

    And why we see 2 Voltage output for each pem?

    PEM 1 status:
      State                      Online
      Temperature                OK                                      
      DC Output:                 OK
      Voltage:
        12.0 V output              12275 mV
        3.3 V output                3320 mV



    ------------------------------
    Harry
    ------------------------------

    Original Message