Switching

Hi! 
I have properly working QinQ on the QFX.  All C-VLANs from customers are double-tagged with S-VLAN. 
Is it possible to pass one or many C-VLANs without double tagging? 
For example, Vlans range 1-101 should be double tagged with ID 1000, but Vlan 102 must be a regular VLAN. 

Thanks for your help.

Here is my solution:
et-0/0/32 and et-0/0/33  are  interfaces to the customer
QinQ vlans 1-101 , regular vlan 102,    vlan on the router 1001

VLAN102 is remaped to VLAN1001

set interfaces et-0/0/32 flexible-vlan-tagging
set interfaces et-0/0/32 encapsulation flexible-ethernet-services

et interfaces et-0/0/32 description SRV1-vnic1
set interfaces et-0/0/32 enable
set interfaces et-0/0/32 flexible-vlan-tagging
set interfaces et-0/0/32 encapsulation flexible-ethernet-services

set interfaces et-0/0/32 unit 102 encapsulation vlan-bridge
set interfaces et-0/0/32 unit 102 vlan-id 102
set interfaces et-0/0/32 unit 102 input-vlan-map swap
set interfaces et-0/0/32 unit 102 output-vlan-map swap
set interfaces et-0/0/32 unit 102 family ethernet-switching vlan members v1001

set interfaces et-0/0/32 unit 2100 encapsulation vlan-bridge
set interfaces et-0/0/32 unit 2100 vlan-id-list 1-101
set interfaces et-0/0/32 unit 2100 input-vlan-map push
set interfaces et-0/0/32 unit 2100 output-vlan-map pop

set vlans q-in-q interface et-0/0/32.2100
set vlans q-in-q interface et-0/0/33.2100

set vlans v1001 vlan-id 1001

------------------------------
ANATOLII SUKHOMLIN
------------------------------