Junos OS

 View Only
last person joined: 7 days ago 

Ask questions and share experiences about Junos OS.

  • 1.  Question on syslog severity levels

     
    Posted 07-24-2022 06:16

    Hi.

     

    When I configure a syslog severity level, are higher severity levels also included?

     

    In other words, if I configure a syslog severity level of 'warning', will syslog messages of severity level 'emergency' be logged?

     

    Thanks,

    Deepak


    Juniper Business Use Only



  • 2.  RE: Question on syslog severity levels
    Best Answer

    Posted 07-24-2022 12:49
    Yes, you set the level and all higher priority are included.

    https://supportportal.juniper.net/s/article/Junos-Severity-level-configuration-on-syslog-messages

    -------

    The Junos OS logs syslog message whose priority is equal and higher than the configured numerical value: (eg. If the severity level "warning(4)" is set, syslog message whose severity levels of emergency(0), alert(1), critical(2), error(3), and warning(4) are logged.). There are two exceptions to this rule. No messages are logged by setting "none", and all severity levels are logged by setting "any".

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: Question on syslog severity levels

     
    Posted 07-25-2022 00:46
    Got it. Thanks Steve!
    Original Message