Routing

So my question is simple is there a way on the MX using Push  / Pop   to push a tag on ALL customer vlans , to make to possible to just say to the cusotmer 
here is a link , use whatever vlans you wish between sites. 

SRX acting as CE 

lab@Customer100_West# show 
vlan-tagging;
unit 0 {
    vlan-id 56;
    family inet {
        address 192.168.100.1/24;
    }
}

[edit interfaces ge-0/0/0]
lab@Customer100_West# 


#################

MX Customer facing port 


[edit interfaces ge-0/0/9]
lab@vmx1# show 
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 55 {
    encapsulation vlan-bridge;
    vlan-id 55;
    input-vlan-map {
        push;
        vlan-id 100;
    }
    output-vlan-map pop;
}
unit 56 {
    encapsulation vlan-bridge;
    vlan-id 56;
    input-vlan-map {
        push;
        vlan-id 100;
    }
    output-vlan-map pop;
}

#################


MX Bridge domain config 


lab@vmx1# show routing-instances 
VS {
    instance-type virtual-switch;
    bridge-domains {
        bd100 {
            interface ge-0/0/4.100;
            interface ge-0/0/9.56;
            interface ge-0/0/9.55;
        }
    }
}


##############

Link between MXs


[edit interfaces ge-0/0/4]
lab@vmx1# show 
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 100 {
    encapsulation vlan-bridge;
    vlan-id 100;
}

​

lab@vmx1# set bridge-domains bd100 vlan-id all 

[edit routing-instances VS bridge-domains bd100 interface]
  'ge-0/0/9.55'
    vlan-id-range is specified for this logical interface; 'vlan-id all' should also be enabled
error: configuration check-out failed: (statements constraint check failed)

lab@vmx1# commit check 
[edit routing-instances VS bridge-domains bd100 interface]
  'ge-0/0/9.56'
    interface with input/output vlan-maps cannot be added to a routing-instance with a vlan-id/vlan-tags configured
[edit routing-instances VS bridge-domains bd100 interface]
  'ge-0/0/9.55'
    interface with input/output vlan-maps cannot be added to a routing-instance with a vlan-id/vlan-tags configured
error: configuration check-out failed: (statements constraint check failed)