Hello
I'm facing an issue with my QFX connected to a Supermicro Blade through an optical link using QSFP.
Both are seeing their interface but it does not go up. I ran a diagnose on the QFX. I have attached the result.
I tried AutoNegotiation on both side, then on only one side(switching sides), then no negotiation on both side, fec, no fec etc
Nothing seems to work.
I ran a test between two QFX using the same QSFP it works straight. Same goes when running a test between two SuperMicro with the same QSFP.
If you can help it will be greatly appreciated !
Thank you !
------------------------------
ROMAIN CARRE
------------------------------