Assuming you will be running the MX as your BNG (Broadband Network Gateway) for the downstream subscribers there are a few options.
First you choose if you will be running vlan per subscriber or per service.
Choose your layer 2 transport mechanism and transport
Assign the dhcp and subscriber db RADIUS connections
This is the master example documentation showing the options with the Juniper side configuration details.
https://www.juniper.net/documentation/en_US/design-and-architecture/service-provider-edge/information-products/topic-collections/understanding-subscriber-mgmt.pdf------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home------------------------------
Original Message:
Sent: 07-06-2022 08:17
From: Muhammad Latif
Subject: QFX5110 to MX204 layer 3 efficient communications
We have MX204 Router and we have recently purchased QFX 5110 as a core. How efficiently can we configure with the combinations so that this core can utilise all layer-3 features and can transmit traffic easily to Nokia OLTs?
------------------------------
Muhammad Latif
------------------------------