I am trying to see if it's possible to use the analyzer to mirror an interface to a remote server so I can packet capture. Running 21.4R3-S2.3
set forwarding-options analyzer test1 input ingress interface et-0/0/49.0
set forwarding-options analyzer test1 input egress interface et-0/0/49.0
set forwarding-options analyzer test1 output routing-instance mgmt_junos ip-address x.x.x.11
> show forwarding-options analyzer
Analyzer name : test1
Mirror rate : 1
Maximum packet length : 0
State : down
Ingress monitored interfaces : et-0/0/49.0
Egress monitored interfaces : et-0/0/49.0
the ip is reachable in the management routing instance, but the state remains down. I don't see any erspan traffic on the remote host. I can't find much in the way of docs for this, is this possible?