Hi Folks!
I need a hand with a weird problem, we have an mx960 with an MPC10, and without reason the interfaces of the PIC 0 stop sensing/record the input and output bw rate, but the traffic still passing without problems, the ports are UP but if I check the interface Input rate and Output rate this counters never changes, the interfaces are part of different lags (each one) and in consequence the input and output rate of the lag is freeze too.
There is any way to restart the traffic stats collecting without restart the whole fpc?
For example:
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
> show interfaces et-9/0/1 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
FEC Corrected Errors Rate 0
FEC Uncorrected Errors Rate 0
{master}
>
Checking the same info at the lag interface (which this physical port is part of), the result its the same:
> show interfaces ae19 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
{master}
> show interfaces ae19 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
{master}
> show interfaces ae19 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
{master}
> show interfaces ae19 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
{master}
> show interfaces ae19 | match rate
Input rate : 42733206120 bps (3692069 pps)
Output rate : 743274544 bps (1148363 pps)
{master}
>
The interfaces config dont have any "special":
> show configuration interfaces et-9/0/1 | display set
set interfaces et-9/0/1 gigether-options 802.3ad ae19show configuration interfaces ae19 | display set
set interfaces ae19 aggregated-ether-options link-speed 100gset interfaces ae19 aggregated-ether-options lacp activeset interfaces ae19 unit 0 family inet filter input flowset interfaces ae19 unit 0 family inet address x.x.x.x/31set interfaces ae19 unit 0 family inet6 filter input flow_v6set interfaces ae19 unit 0 family inet6 address x:x:x:x:x:x/127
Additional information:
> show chassis fpc errors 9
FPC Scope Category Level Occurred Cleared Threshold Action-Taken Action
9 board functional Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
memory Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
io Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
storage Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
switch Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
processing Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
internal Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|
Fatal 0 0 1 0 GET STATE|RESET
pfe functional Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
memory Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
io Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
storage Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
switch Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
processing Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
internal Minor 0 0 1 0 LOG|CM ALARM|
Major 0 0 1 0 GET STATE|CM ALARM|DISABLE PFE
Fatal 0 0 1 0 GET STATE|RESET
Pfe-State: pfe-0 -ENABLED | pfe-1 -ENABLED |
{master}
> show system firmware | match "FPC 9"
FPC 9 ROM Monitor 0 0 26.1.0 26.1.0 OK
FPC 9 PCIE Sw(0) 4 .0.0 0 OK
FPC 9 MPCS(0) 2 0.19.0 0.19.0 OK
FPC 9 I2CS CPLD 6 0.28.0 0.28.0 OK
FPC 9 I2CS CPLD REBOOT 7 0.1.0 0 OK
FPC 9 I2CS CPLD UFM 8 0.0.0 0 OK
FPC 9 BOOT CPLD 5 0.14.0 0.14.0 OK
show version
Hostname: Router
Model: mx960
Junos: 20.4R3.8
JUNOS OS Kernel 64-bit [20210618.f43645e_builder_stable_11-204ab]
Thanks for your help!
------------------------------
Thanks
Roberto
------------------------------