Hi all,
on Juniper MX10003 with Junos: 21.4R3-S2.3, I have a 100G juniper original optic that receive an alarm due to connectivity issue (fiber issue).
It started to fill the logs with the alarms set and cleared:
Sep 28 23:36:56.954 2023 mx10003 fpc0 qsfp-0/1/5 Chan# 3: Rx power low alarm set
Sep 28 23:36:56.954 2023 mx10003 fpc0 qsfp-0/1/5 Chan# 3: Rx power low warning set
Sep 28 23:37:34.081 2023 mx10003 fpc0 qsfp-0/1/5 Chan# 0: Rx power low alarm cleared
Sep 28 23:37:34.081 2023 mx10003 fpc0 qsfp-0/1/5 Chan# 0: Rx power low warning cleared
So we decide to disable the physical interface until the connectivity issue resolution to avoid the log messages, but the logs appear also with interface disabled:
user@MX10003> show interfaces et-0/1/5
Physical interface: et-0/1/5, Administratively down, Physical link is Down
Any idea why the mx10k3 continue to fill the logs with alarms also with interface disabled?
Thank you!
MP
------------------------------
M P
------------------------------