Hi,
I am using the following logical systems topology
R1------------R2-------------R3
R1 = designated_source router
R3 = desinated_destinstion router
When a ping packet is generated for R1 for the IGMP group, it says no route to host.
Configs are as below for the logical systems:
R1:
set logical-systems R1 interfaces ge-0/0/0 unit 1 vlan-id 101
set logical-systems R1 interfaces ge-0/0/0 unit 1 family inet address 10.0.0.1/24
set logical-systems R1 interfaces lo0 unit 1 family inet address 1.1.1.1/32
set logical-systems R1 protocols ospf area 0.0.0.0 interface all
set logical-systems R1 protocols ospf area 0.0.0.0 interface fxp0.0 disable
set logical-systems R1 protocols pim rp static address 2.2.2.2
set logical-systems R1 protocols pim interface all mode sparse
set logical-systems R1 protocols pim interface all version 2
set logical-systems R1 protocols pim interface fxp0.0 disable
set logical-systems R1 routing-options router-id 1.1.1.1
R2:
set logical-systems R2 interfaces ge-0/0/0 unit 2 vlan-id 102
set logical-systems R2 interfaces ge-0/0/0 unit 2 family inet address 20.0.0.1/24
set logical-systems R2 interfaces ge-0/0/1 unit 1 vlan-id 101
set logical-systems R2 interfaces ge-0/0/1 unit 1 filter input PACKET_CAPTURE
set logical-systems R2 interfaces ge-0/0/1 unit 1 family inet address 10.0.0.2/24
set logical-systems R2 interfaces gr-0/0/10 unit 0 tunnel source 20.0.0.1
set logical-systems R2 interfaces gr-0/0/10 unit 0 tunnel destination 20.0.0.2
set logical-systems R2 interfaces gr-0/0/10 unit 0 family inet address 21.21.21.1/24
set logical-systems R2 interfaces lo0 unit 2 family inet address 2.2.2.2/32
set logical-systems R2 protocols ospf area 0.0.0.0 interface all
set logical-systems R2 protocols ospf area 0.0.0.0 interface fxp0.0 disable
set logical-systems R2 protocols pim rp local address 2.2.2.2
set logical-systems R2 protocols pim interface all mode sparse
set logical-systems R2 protocols pim interface all version 2
set logical-systems R2 protocols pim interface fxp0.0 disable
set logical-systems R2 routing-options static route 30.0.0.0/24 next-hop 21.21.21.2
set logical-systems R2 routing-options router-id 2.2.2.2
R3:
set logical-systems R3 interfaces ge-0/0/0 unit 3 vlan-id 103
set logical-systems R3 interfaces ge-0/0/0 unit 3 family inet address 30.0.0.1/24
set logical-systems R3 interfaces ge-0/0/1 unit 2 vlan-id 102
set logical-systems R3 interfaces ge-0/0/1 unit 2 filter input PACKET_CAPTURE
set logical-systems R3 interfaces ge-0/0/1 unit 2 family inet address 20.0.0.2/24
set logical-systems R3 interfaces gr-0/0/10 unit 1 tunnel source 20.0.0.2
set logical-systems R3 interfaces gr-0/0/10 unit 1 tunnel destination 20.0.0.1
set logical-systems R3 interfaces gr-0/0/10 unit 1 family inet address 21.21.21.2/24
set logical-systems R3 interfaces lo0 unit 3 family inet address 3.3.3.3/32
set logical-systems R3 protocols igmp interface ge-0/0/0.3 static group 225.1.1.1
set logical-systems R3 protocols ospf area 0.0.0.0 interface all
set logical-systems R3 protocols ospf area 0.0.0.0 interface fxp0.0 disable
set logical-systems R3 protocols pim rp static address 2.2.2.2
set logical-systems R3 protocols pim interface all mode sparse
set logical-systems R3 protocols pim interface all version 2
set logical-systems R3 protocols pim interface fxp0.0 disable
set logical-systems R3 routing-options static route 1.1.1.1/32 next-hop 21.21.21.1
set logical-systems R3 routing-options static route 10.0.0.0/24 next-hop 21.21.21.1
set logical-systems R3 routing-options router-id 3.3.3.3
The output at R1 after ping:
root@vmx1_re# run ping 225.1.1.1 ttl 255 source 1.1.1.1 logical-system R1
PING 225.1.1.1 (225.1.1.1): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
run show multicast route logical-system R1
Instance: master Family: INET
Group: 225.1.1.1
Source: 1.1.1.1/32
Upstream interface: local
Downstream interface list:
ge-0/0/0.1 pe-0/0/10.229377
Instance: master Family: INET6