Good time, everyone 🙂
I have a little issue in my MPLS lab. I got 3 Juniper routers, running 12.1R1.9. Connected in a line (R1--R2--R3). Got OSPF routing configured across them. Then i am trying to configure a static LSP as described here
http://www.juniper.net/techpubs/en_US/junos11.2/topics/usage-guidelines/mpls-configuring-static-lsps.html
Now, the document says that:
However, when i create the entry, it doesn't go into inet.0 table. Instead it goes to inet.3 table.
Here is the configuration and the show output
[edit protocols mpls]
root@Core3# show
static-label-switched-path 10.0.0.0/24 {
ingress {
install 10.0.0.0/24;
next-hop 192.168.1.2;
to 192.168.0.1;
push 1000002;
}
}
interface em0.0;
interface all;
root@Core3# run show route
inet.0: 8 destinations, 9 routes (8 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/24 *[OSPF/150] 00:53:04, metric 0, tag 0
> to 192.168.1.2 via em1.0
10.0.1.0/24 *[Direct/0] 00:54:09
> via em0.0
10.0.1.1/32 *[Local/0] 00:54:09
Local via em0.0
192.168.0.0/16 *[OSPF/150] 00:53:04, metric 0, tag 0
> to 192.168.1.2 via em1.0
192.168.0.0/24 *[OSPF/10] 00:53:04, metric 2
> to 192.168.1.2 via em1.0
192.168.1.0/24 *[Direct/0] 00:54:08
> via em1.0
192.168.1.3/32 *[Local/0] 00:54:08
Local via em1.0
[OSPF/150] 00:53:04, metric 0, tag 0
> to 192.168.1.2 via em1.0
224.0.0.5/32 *[OSPF/10] 00:54:44, metric 1
MultiRecv
inet.3: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/24 *[MPLS/6/1] 00:00:42, metric 0
> to 192.168.1.2 via em1.0, Push 1000002
192.168.0.1/32 *[MPLS/6/1] 00:00:42, metric 0
> to 192.168.1.2 via em1.0, Push 1000002
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 00:54:44, metric 1
Receive
1 *[MPLS/0] 00:54:44, metric 1
Receive
2 *[MPLS/0] 00:54:44, metric 1
Receive
13 *[MPLS/0] 00:54:44, metric 1
Receive
Any help would be highly appreciated. 🙂
Regards,
Sergey.