Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
I have 2 SRX340 firewalls that have lost access to SSH. SSH access was locked down to the main data center subnet. Long story short the site-to-site VPN between the data center and these two sites is down. At other sites with this issue, I was able to log into Jweb and add a new subnet to SSH from to the policy-options > prefix-list, and that worked fine. Unfortunately, these two sites go to the setup wizard when logging into jweb and I can't seem to get around it to add the new subnet. Is there any way to load the full jweb when the SRX keeps loading the setup wizard. Note that the two units throwing the setup wizard have been in production for at least a year.
Are you able to connect via cli and check the web management configuration.
show configuration system services web-management
I can't find the documentation but seem to remember there is some statement here that gets removed after the wizard is run and might still be in your configuration.
** Removed double post
I know the command to turn it off from the CLI, "delete system autoinstallation"
My issue is I can't access the CLI because it is locked down to a subnet that is unreachable because the Site to Site changed unexpectedly. I have 84 sites that have VPNs back to the main site and have been able to update the VPN using GUI in all but two. Those two sites have the GUI defaulting to the setup wizard. I need to bypass the GUI so I can change the VPN, then I can access the CLI and deal with the setup issue.