Hello everyone.
I`m trying to terminate l2vpn on l3 interface in my lab.
The lab diagram is quite simple:
MX104------ACX2100---ACCESS SWITCH---Client
I`ve got rsvp sessions up:
On MX:
show chassis
fpc 0 {
pic 0 {
tunnel-services {
bandwidth 1g;
}
}
}
network-services enhanced-ip;
show interfaces lt-0/0/10
unit 1 {
encapsulation vlan-ccc;
vlan-id 500;
peer-unit 2;
family ccc;
}
unit 2 {
encapsulation vlan;
vlan-id 500;
peer-unit 1;
family inet {
address 192.168.1.1/24;
}
}
show protocols rsvp
interface xe-2/0/0.1077 {
link-protection;
}
interface xe-2/0/0.2341 {
link-protection;
}
show protocols mpls
label-switched-path MX2-ACX {
to 2.2.2.2;
link-protection;
}
interface xe-2/0/0.1077;
interface xe-2/0/0.2341;
show routing-instances L2VPN-TEST
instance-type l2vpn;
interface lt-0/0/10.1;
route-distinguisher 1.1.1.1:100;
vrf-import L2VPN-TEST-IMPORT;
vrf-export L2VPN-TEST-EXPORT;
protocols {
l2vpn {
encapsulation-type ethernet-vlan;
interface lt-0/0/10.1;
site SITE-1 {
site-identifier 100;
interface lt-0/0/10.1 {
remote-site-id 1100;
}
}
}
}
}
On ACX side:
show interfaces ge-1/0/0
flexible-vlan-tagging;
mtu 1518;
encapsulation flexible-ethernet-services;
unit 500 {
encapsulation vlan-ccc;
vlan-id 500;
family ccc;
}
show protocols rsvp
interface xe-1/3/0.1077 {
link-protection;
}
interface xe-1/3/0.2341 {
link-protection;
}
show protocols mpls
label-switched-path ACX-MX {
to 1.1.1.1;
link-protection;
}
interface xe-1/3/0.1077;
interface xe-1/3/0.2341;
show routing-instances L2VPN-TEST
instance-type l2vpn;
interface ge-1/0/0.500;
route-distinguisher 2.2.2.2:100;
vrf-import L2VPN-TEST-IMPORT;
vrf-export L2VPN-TEST-EXPORT;
protocols {
l2vpn {
encapsulation-type ethernet-vlan;
interface ge-1/0/0.500;
site SITE-1 {
site-identifier 1100;
interface ge-1/0/0.500 {
remote-site-id 100;
}
}
}
}
}
L2VPN connection is up:
Instance: L2VPN-TEST
Edge protection: Not-Primary
Local site: SITE-1 (100)
connection-site Type St Time last up # Up trans
SITE-2 (200) loc CN
1100 rmt Up Mar 9 09:14:36 2010 1
Remote PE: 2.2.2.2, Negotiated control-word: Yes (Null)
Incoming label: 17, Outgoing label: 800001
Local interface: lt-0/0/10.1, Status: Up, Encapsulation: VLAN
Flow Label Transmit: No, Flow Label Receive: No
1200 rmt OR
From ACX:
Instance: L2VPN-TEST
Edge protection: Not-Primary
Local site: SITE-1 (1100)
connection-site Type St Time last up # Up trans
SITE-2 (1200) loc OR
100 rmt Up Jan 1 19:40:59 2010 1
Remote PE: 1.1.1.1, Negotiated control-word: Yes (Null)
Incoming label: 800001, Outgoing label: 17
Local interface: ge-1/0/0.500, Status: Up, Encapsulation: VLAN
200 rmt OR
but from client side i cannot ping 192.168.1.1 on Mx`s lt interface.