Hi,
Given below is the topology. We need to create an l2circuit (martini) between PE1 and PE2 between AS1 and AS2.
AS1 is Cisco enabled and AS2 is Juniper enabled.
PE1 (Cisco) ------ MPLS Cloud (AS1) ----- ASBR1 (Cisco) _______ ASBR2 (Juniper) ------- MPLS Cloud (AS2) ------ PE2 (Juniper)
Cisco talks about using "l2 vfi", e-bgp "send label", and "mpls forwarding" on the ASBR's (if both the AS'es are Cisco enabled).
Whats the Juniper equivalent of "l2 vfi"?
Thanks in advance
Anand