Why doesn't juniper show the ge-0/0/0 etc, interfaces?

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

Qemu options? What am I supposed to be looking for exactly? Are you talking about when I imported the files through winscp?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

Qemu options? What am I supposed to be looking for exactly? Are you talking about when I imported the files through winscp?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

Qemu options? What am I supposed to be looking for exactly? Are you talking about when I imported the files through winscp?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

I'll try to ask support for a different copy. Your vmx is  version 22.3R1.... what's your qfx version?

Qemu options? What am I supposed to be looking for exactly? Are you talking about when I imported the files through winscp?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?

I would not trouble support they will not support this , otherwise they would get flooded with requests.  

I'll try to ask support for a different copy. Your vmx is  version 22.3R1.... what's your qfx version?

Qemu options? What am I supposed to be looking for exactly? Are you talking about when I imported the files through winscp?

Hi,

Please check on your qemu option.

Thanks

 I wonder do I have the wrong PFE  connected to router? In your topology it says r1-fp, but mine says the following in picture. I know you can re-name them... but i've seen a few that's named FPE as default

I'm using the interfaces shown  as int,  in eve.  also version 22.3R1

The platform is eve-ng. the router version is (vmx-bundle-22.4R1.10) that's connected to the switch PFE version (vqfx-20.2R1-2019010209-pfe). I also have the switch RE  (vqfx-20.2R1.10-re-qemu) that's connected to  PFE (vqfx-20.2R1-2019010209-pfe).... their connected by  em1 internal interface.... same issue on both. What version are you suing? maybe I can contact support for that one.

what platform etc ?
but I have often seen this with faulty hardware. I think the control plane cannot talk to forwarding plane so it sees no interfaces.  
I also see this is on the vQFX if you  delete this line  in config 

set interfaces em1 unit 0 family inet address 169.254.0.2/24

Why doesn't juniper show the ge-0/0/0 etc, interfaces?