Routing

Hi All,

I am new here,

Kindly help to identify and give us advice what need to check since we face some "issue" when do ping directly to our peering IP (Point to Point).
We are local ISP and when we ping to upstream peering IP, the result always unstable.

We have multiple P2P IP to upstream, and all got same issue.

Note:
- We use VLAN between Juniper and our switch (Nokia) and we use aggregate/bundling with 100G port x 2.
- We use default MTU on Juniper interface (1518)
- We use jumbo frame (9212) on Nokia interface

Is there any anomaly or something that we can check further?
Do we need to change the MTU as well on Juniper side?

Many thanks.

------------------------------
Vincensius Yudhistira Lindung Setiyana
------------------------------

This is expected, as you are using the control plane to test data plane performance. Please read:

https://supportportal.juniper.net/s/article/Junos-OS-ICMP-Ping-Showing-Latency-for-Host-Inbound-and-Outbound-traffic?language=en_US
Original Message:
Sent: 08-24-2022 10:23
From: Vincensius Yudhistira Lindung Setiyana
Subject: Juniper MX204 | Junos: 20.4R2.7 | Ping IP Point to Point to Upstream Got Unstable Time (ms)

Hi All,

I am new here,

Kindly help to identify and give us advice what need to check since we face some "issue" when do ping directly to our peering IP (Point to Point).
We are local ISP and when we ping to upstream peering IP, the result always unstable.

We have multiple P2P IP to upstream, and all got same issue.

Note:
- We use VLAN between Juniper and our switch (Nokia) and we use aggregate/bundling with 100G port x 2.
- We use default MTU on Juniper interface (1518)
- We use jumbo frame (9212) on Nokia interface

Is there any anomaly or something that we can check further?
Do we need to change the MTU as well on Juniper side?

Many thanks.

------------------------------
Vincensius Yudhistira Lindung Setiyana
------------------------------

Hi,

Thank you so much for the information.

Noted with thanks.

------------------------------
Vincensius Yudhistira Lindung Setiyana
------------------------------

Original Message:
Sent: 08-24-2022 13:53
From: Unknown User
Subject: Juniper MX204 | Junos: 20.4R2.7 | Ping IP Point to Point to Upstream Got Unstable Time (ms)

This is expected, as you are using the control plane to test data plane performance. Please read:

https://supportportal.juniper.net/s/article/Junos-OS-ICMP-Ping-Showing-Latency-for-Host-Inbound-and-Outbound-traffic?language=en_US
Original Message:
Sent: 08-24-2022 10:23
From: Vincensius Yudhistira Lindung Setiyana
Subject: Juniper MX204 | Junos: 20.4R2.7 | Ping IP Point to Point to Upstream Got Unstable Time (ms)

Hi All,

I am new here,

Kindly help to identify and give us advice what need to check since we face some "issue" when do ping directly to our peering IP (Point to Point).
We are local ISP and when we ping to upstream peering IP, the result always unstable.

We have multiple P2P IP to upstream, and all got same issue.

Note:
- We use VLAN between Juniper and our switch (Nokia) and we use aggregate/bundling with 100G port x 2.
- We use default MTU on Juniper interface (1518)
- We use jumbo frame (9212) on Nokia interface

Is there any anomaly or something that we can check further?
Do we need to change the MTU as well on Juniper side?

Many thanks.

------------------------------
Vincensius Yudhistira Lindung Setiyana
------------------------------