Hello Forum,
Now before I start, I would like to say I googled this tp the best of my abilites but did nit find the answer I was looking for, so I bring my question to the community!
Ok so, the situation is this. We are proof of concept testing the MX series 240 before getting the 960's
The concept we are testing at the moment it IPv4 and IPv6 helper addresses on a dual stack deployment utilizing irb interfaces, which must allow option 82 to pass freely to the v4 and v6 server which is on LINUX.
This is the config I have for v4:
set forwarding-options helpers bootp relay agent-option
set forwarding-options helpers bootp server 2.2.2.2 routing-instance VRF-MANAGEMENT
!
set forwarding-options helpers bootp interface irb.900 broadcast <--Dual stack interface
Which I will test in the lab real soon.
Now what I cant find for the life of me is the equilivent IPv6 commands. I have seen many ways with the dhcp-relay option, but no real good examples, using it in a VRF.
Any help would be apprecated!