Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.
  • 1.  Interfaces Doesn't recognize the VLANs

    This message was posted by a user wishing to remain anonymous
    Posted 06-30-2022 10:25
    This message was posted by a user wishing to remain anonymous

    Hello Everybody!

    I am new to JUNOS and Started to work with their hardware in the few last months,
    I am doing a project in my work (EVE) and started to configure a switch and 2 Routers,
    AR1 is connected to AS1 via TRUNK  with GE-0/0/2 - under it I use router on a stick and configure AE50.1000
    AS1 is connected to the Customer via ACCESS.
    I configured the vlan on the switch and configured the IP's on the routers,
    Problem is that the interfaces haven't connected/recognized the vlan.
    I am adding pictures of everything and of the configurations aswell,
    Please help because I run out of ideas.
    AR & Customer - Junos router
    AS- Junos switch



    AR configurations : 

    AS Configuration:

    Customer configuration:


    Please help guys.


  • 2.  RE: Interfaces Doesn't recognize the VLANs

     
    Posted 06-30-2022 15:14
    You're connecting a 1G interface (AR1 ge-0/0/2) to a 10G interface (AS1 xe-0/0/1). You need to reconfigure the 10G interface to operate at 1G. I have no idea how this is done in EVE.


  • 3.  RE: Interfaces Doesn't recognize the VLANs

    Posted 07-05-2022 16:03
    you might need...

    set chassis aggregated-devices ethernet device-count 5

    set interfaces ae50 aggregated-ether-options lacp active

    ...also, IIRC, EVE allows mix-matched speeds of interfaces (ge connected to xe)

    ------------------------------
    Aaron Gould
    Senior Network Engineer
    aaron@gvtc.com
    https://www.linkedin.com/in/agould123/
    ------------------------------