SRX

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home
------------------------------

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Thank you Steve, 

I only configured one pool to test before proceeding to setup the other subnets. i just cannot get the client to obtain ip address from pool 192.168.1.0/24 when plugging into ge-0/0/2 

Server group is configured 
Address pool is configured 
vlan configured 
IRB configured with the default gateway for the subnet 192.168.1.1 
IRB added to the security zone trust 
allowed host-inbound protocol and services all. 
security policy trust to trust permitting any to any 

I am not sure what i am missing. I got it to work before using an old code 15.4 but upgraded to 20.2R3.9. 

Thank you once again for checking 
Nils. 

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

found the issue i deleted the following and DHCP started working. 

[edit protocols]
- l2-learning {
- global-mode switching;
- }
Original Message:
Sent: 10-22-2022 19:54
From: Unknown User
Subject: Home Lab DHCP not working

Thank you Steve, 

I only configured one pool to test before proceeding to setup the other subnets. i just cannot get the client to obtain ip address from pool 192.168.1.0/24 when plugging into ge-0/0/2 

Server group is configured 
Address pool is configured 
vlan configured 
IRB configured with the default gateway for the subnet 192.168.1.1 
IRB added to the security zone trust 
allowed host-inbound protocol and services all. 
security policy trust to trust permitting any to any 

I am not sure what i am missing. I got it to work before using an old code 15.4 but upgraded to 20.2R3.9. 

Thank you once again for checking 
Nils. 

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Hi Steve.
I have similar issue:
If I am in vlan 31 I get IP address but in vlan 29 no.  I have more POOLS configured but only two give me no IP. has srx345 or junos version 19.4R3.11 some limits? or do I need somehow activate new pool? How can I do some reset of only this pool?, Thanks for answer.
BR
Tomas

set system services dhcp-local-server group POOL18 interface reth2.29
set system services dhcp-local-server group POOL7 interface reth2.31



set access address-assignment pool POOL18 family inet network 192.168.37.64/26
set access address-assignment pool POOL18 family inet range RANGE18 low 192.168.37.66
set access address-assignment pool POOL18 family inet range RANGE18 high 192.168.37.100
set access address-assignment pool POOL18 family inet dhcp-attributes name-server 192.168.5.5
set access address-assignment pool POOL18 family inet dhcp-attributes name-server 192.168.21.21
set access address-assignment pool POOL18 family inet dhcp-attributes router 192.168.37.126
set access address-assignment pool POOL18 family inet dhcp-attributes propagate-settings reth2.29
set protocols ospf area 0.0.0.1 interface reth2.29 passive

set access address-assignment pool POOL7 family inet network 192.168.31.0/26
set access address-assignment pool POOL7 family inet range RANGE7 low 192.168.31.2
set access address-assignment pool POOL7 family inet range RANGE7 high 192.168.31.55
set access address-assignment pool POOL7 family inet dhcp-attributes name-server 192.168.5.5
set access address-assignment pool POOL7 family inet dhcp-attributes name-server 192.168.21.21
set access address-assignment pool POOL7 family inet dhcp-attributes router 192.168.31.62
set access address-assignment pool POOL7 family inet dhcp-attributes propagate-settings reth2.31
set protocols ospf area 0.0.0.1 interface reth2.31 passive

set security zones security-zone MANAGEMENT-OFFICE interfaces reth2.29
set security zones security-zone MEETING interfaces reth2.31

set interfaces reth2 unit 29 vlan-id 29
set interfaces reth2 unit 29 family inet address 192.168.37.126/26

set interfaces reth2 unit 31 vlan-id 31
set interfaces reth2 unit 31 family inet address 192.168.31.62/26

show dhcp statistics interface reth2.29
Packets dropped:
Total 2118
No available addresses 2118

Messages received:
BOOTREQUEST 4281
DHCPDECLINE 0
DHCPDISCOVER 4281
DHCPINFORM 0
DHCPRELEASE 0
DHCPREQUEST 0
DHCPLEASEACTIVE 0
DHCPLEASEUNASSIGNED 0
DHCPLEASEUNKNOWN 0
DHCPLEASEQUERYDONE 0

Messages sent:
BOOTREPLY 0
DHCPOFFER 0
DHCPACK 0
DHCPNAK 0
DHCPFORCERENEW 0

reth2.31 no packet drops

------------------------------
TOMAS JUHAS
------------------------------

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Hi Spuluka.

I have a similar problem. I have configured more pools and subinterface for different vlan. The last two configured don't work. Configuration is the same as functionally pools.  I did not configure previous pools. I did last two.  Do I need to activate this pool somehow?

I would like to ask you if there some limitation of number of pools or some junos version limitation?

I have SRX345 with version 19.4R3.11

Many Thanks

------------------------------
TOMAS JUHAS
------------------------------

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

I'm not aware of any limits.

Do your two new zones allow dhcp for the zone in host inbound?

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home
------------------------------

Original Message:
Sent: 11-15-2022 02:37
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Spuluka.

I have a similar problem. I have configured more pools and subinterface for different vlan. The last two configured don't work. Configuration is the same as functionally pools.  I did not configure previous pools. I did last two.  Do I need to activate this pool somehow?

I would like to ask you if there some limitation of number of pools or some junos version limitation?

I have SRX345 with version 19.4R3.11

Many Thanks

------------------------------
TOMAS JUHAS

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Hi Steve,
yes, it is allowed. I am struggling with this, because I can't find anything wrong...

security-zone MANAGEMENT-OFFICE {
            description RECEPCE;
            host-inbound-traffic {
                system-services {
                    all;
                }
                protocols {
                    all;
                }
            }
            interfaces {
                reth2.29;

        security-zone MEETING {
            host-inbound-traffic {
                system-services {
                    all;
                }
                protocols {
                    all;
                }
            }
            interfaces {
                reth2.31;

------------------------------
TOMAS JUHAS
TOMASTOMASTOMASJUHASTOMAS
------------------------------

Original Message:
Sent: 11-15-2022 20:22
From: STEVE PULUKA
Subject: Home Lab DHCP not working

I'm not aware of any limits.

Do your two new zones allow dhcp for the zone in host inbound?

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 11-15-2022 02:37
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Spuluka.

I have a similar problem. I have configured more pools and subinterface for different vlan. The last two configured don't work. Configuration is the same as functionally pools.  I did not configure previous pools. I did last two.  Do I need to activate this pool somehow?

I would like to ask you if there some limitation of number of pools or some junos version limitation?

I have SRX345 with version 19.4R3.11

Many Thanks

------------------------------
TOMAS JUHAS

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Hi.

Nobody any suggestion?

Some additional info. If I put manually IP from pool to host. GW is reachable. I tried to deactivate pool and to activate it again but no influence. Still not working...

this is for me weird...:
show dhcp statistics interface reth2.29
Packets dropped:
Total 12770
No available addresses 12770

thanks for any suggestion

------------------------------
TOMAS
------------------------------

Original Message:
Sent: 11-16-2022 01:55
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Steve,
yes, it is allowed. I am struggling with this, because I can't find anything wrong...

security-zone MANAGEMENT-OFFICE {            description RECEPCE;            host-inbound-traffic {                system-services {                    all;                }                protocols {                    all;                }            }            interfaces {                reth2.29;

        security-zone MEETING {            host-inbound-traffic {                system-services {                    all;                }                protocols {                    all;                }            }            interfaces {                reth2.31;

------------------------------
TOMAS JUHAS
TOMASTOMASTOMASJUHASTOMAS

Original Message:
Sent: 11-15-2022 20:22
From: STEVE PULUKA
Subject: Home Lab DHCP not working

I'm not aware of any limits.

Do your two new zones allow dhcp for the zone in host inbound?

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 11-15-2022 02:37
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Spuluka.

I have a similar problem. I have configured more pools and subinterface for different vlan. The last two configured don't work. Configuration is the same as functionally pools.  I did not configure previous pools. I did last two.  Do I need to activate this pool somehow?

I would like to ask you if there some limitation of number of pools or some junos version limitation?

I have SRX345 with version 19.4R3.11

Many Thanks

------------------------------
TOMAS JUHAS

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

Hi .
Another additional info:
On dhcp server GW interface I can see only this but no response (OUT)
11:20:46.092665 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:20:46.102734 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:21:02.115768 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:21:02.115792 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300

anybody some sugestion?

------------------------------
TOMAS
------------------------------

Original Message:
Sent: 11-21-2022 07:13
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi.

Nobody any suggestion?

Some additional info. If I put manually IP from pool to host. GW is reachable. I tried to deactivate pool and to activate it again but no influence. Still not working...

this is for me weird...:
show dhcp statistics interface reth2.29
Packets dropped:
Total 12770
No available addresses 12770

thanks for any suggestion

------------------------------
TOMAS

Original Message:
Sent: 11-16-2022 01:55
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Steve,
yes, it is allowed. I am struggling with this, because I can't find anything wrong...

security-zone MANAGEMENT-OFFICE {            description RECEPCE;            host-inbound-traffic {                system-services {                    all;                }                protocols {                    all;                }            }            interfaces {                reth2.29;

        security-zone MEETING {            host-inbound-traffic {                system-services {                    all;                }                protocols {                    all;                }            }            interfaces {                reth2.31;

------------------------------
TOMAS JUHAS
TOMASTOMASTOMASJUHASTOMAS

Original Message:
Sent: 11-15-2022 20:22
From: STEVE PULUKA
Subject: Home Lab DHCP not working

I'm not aware of any limits.

Do your two new zones allow dhcp for the zone in host inbound?

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 11-15-2022 02:37
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Spuluka.

I have a similar problem. I have configured more pools and subinterface for different vlan. The last two configured don't work. Configuration is the same as functionally pools.  I did not configure previous pools. I did last two.  Do I need to activate this pool somehow?

I would like to ask you if there some limitation of number of pools or some junos version limitation?

I have SRX345 with version 19.4R3.11

Many Thanks

------------------------------
TOMAS JUHAS

Original Message:
Sent: 10-22-2022 12:29
From: STEVE PULUKA
Subject: Home Lab DHCP not working

Looks like the only dhcp server setup here is the original defaul trust one in 192.168.1.0/24.

If you are looking to have this in the other vlans you need to create the server and attribute configuration for the other subnets as outline here.
https://www.juniper.net/documentation/us/en/software/junos/dhcp/topics/topic-map/dhcp-server-configuration.html

------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home

Original Message:
Sent: 10-21-2022 20:14
From: Unknown User
Subject: Home Lab DHCP not working

I am trying to get DHCP working on a SRX-300 but it is not working. Any help will be appreciated: 

admin@Home-FW> show configuration
version 20.2R3.9;

}
services {
ftp;
ssh;
telnet;
netconf {
ssh;
}
dhcp-local-server {
group homelab {
interface irb.0;
}
}
web-management {
https {
system-generated-certificate;
interface [ vlan.0 ge-0/0/5.0 ];
}
}
}
name-server {
8.8.8.8;
8.8.4.4;
}
syslog {
archive size 100k files 3;
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
max-configurations-on-flash 5;
max-configuration-rollbacks 5;
license {
autoupdate {
url https://ae1.juniper.net/junos/key_retrieval;
}
}
phone-home {
server https://redirect.juniper.net;
rfc-compliant;
}
}
security {
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
nat {
source {
rule-set trust-to-untrust {
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
policies {
from-zone trust to-zone trust {
policy trust-to-trust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
irb.0 {
host-inbound-traffic {
system-services {
dhcp;
}
}
}
irb.4;
irb.5;
irb.6;
ge-0/0/5.0;
}
}
security-zone untrust {
screen untrust-screen;
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
https;
}
}
}
ge-0/0/7.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
}
}
}
interfaces {
ge-0/0/0 {
description Internet;
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
ge-0/0/1 {
description to-netgear-poe-sw-port8;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
interface-mode access;
vlan {
members homelab-vlan4;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.100.1/24;
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family inet {
dhcp {
vendor-id Juniper-srx300;
}
}
}
}
irb {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
unit 4 {
family inet {
address 192.168.2.1/24;
}
}
unit 5 {
family inet {
address 192.168.3.1/24;
}
}
unit 6 {
family inet {
address 192.168.6.1/24;
}
}
}
}
access {
address-assignment {
pool pool-trust {
family inet {
network 192.168.1.0/24;
range r1 {
low 192.168.1.20;
high 192.168.1.254;
}
dhcp-attributes {
maximum-lease-time 7200;
name-server {
8.8.8.8;
8.8.4.4;
}
router {
192.168.1.1;
}
}
}
}
}
}
vlans {
homelab-vlan4 {
vlan-id 4;
l3-interface irb.4;
}
homelab-vlan5 {
vlan-id 5;
l3-interface irb.5;
}
homelab-vlan6 {
vlan-id 6;
l3-interface irb.6;
}
vlan-trust {
vlan-id 3;
l3-interface irb.0;
}
}
protocols {
l2-learning {
global-mode switching;
}
rstp {
interface all;
}
}

HI

now I think that I found where is the issue but not the solution, how to fix it...

What are you thinking, can this help me without influence to another pools?
set forwarding-options dhcp-relay forward-snooped-clients non-configured-interfaces

debugging DHCP
Nov 23 15:33:08.434680 [MSTR][DEBUG][default:default][SVR][INET][reth2.29] jdhcpd_find_client_from_client_pdu: BOOTPREQUEST could not find client table ent
Nov 23 15:33:08.439553 [MSTR][DEBUG] jdhcpd_packet_map_to_wholesale_client: No wholesale clients moved out routing instance default:default
Nov 23 15:33:08.439732 [MSTR][DEBUG] jdhcpd_packet_map_to_wholesale_client: Client entry NOT found
Nov 23 15:33:08.439772 [MSTR][NOTE] jdhcpd_packet_handle: RECEIVE DISCOVER: stats_safd 0x0 , safd 0x2a36c00 reth2.29
Nov 23 15:33:09.525525 [MSTR][DEBUG][default:default][SVR][INET][reth2.29] jdhcpd_process_forward_only_or_drop: Returning ... forward-only flags not set (flags=deaddead, rc_flags 8a40809) for routing context 0
Nov 23 15:33:09.525594 [MSTR][DEBUG] jdhcpd_short_cycle_protection_config_get: Short cycle protection NOT configured for reth2.29

DHCP pool

Nov 23 15:31:17.390540 [INIT][DEBUG] jdhcpd_cfg_do_attrs_common: Doing Attributes LR:default RI:default Pool:POOL18 - action 1, INET
Nov 23 15:31:17.390616 [INIT][DEBUG] jdhcpd_pool_find: cfg 25c0000, pool_name 5bfed528, POOL18
Nov 23 15:31:17.390644 [INIT][DEBUG] jdhcpd_pool_find: Pool POOL18 NOT found 0x0 w/ cfg container 0x25c0000
Nov 23 15:31:17.390781 [INIT][DEBUG] jdhcpd_server_attributes_process: got name-server 192.168.5.5
Nov 23 15:31:17.390855 [INIT][DEBUG] jdhcpd_server_attributes_process: got name-server 192.168.21.21
Nov 23 15:31:17.390914 [INIT][DEBUG] jdhcpd_server_attributes_process: got router 192.168.37.126
Nov 23 15:31:17.390972 got propagate-settings reth2.29
Nov 23 15:31:17.391057 [INIT][DEBUG] jdhcpd_platform_process_local_server_attributes_cfg_han: propagate settings done - number of ifls in pool are 0
Nov 23 15:31:17.391242 [INIT][DEBUG] jdhcpd_cfg_get_pool_subnet_mask: Got subnet mask, Mask:255.255.255.192, LR:default RI:default Pool:POOL18
Nov 23 15:31:17.391288 [INIT][DEBUG] jdhcpd_cfg_do_attrs_common: Adding NEW POOL in LR:default RI:default, type SERVER, POOL POOL18 to INET, cfg_ptr 0x25c0000
Nov 23 15:31:17.391319 [INIT][DEBUG] sus_name_get: Extracted ifd_name = reth2
Nov 23 15:31:17.391338 jdhcpd_propagate_setting_to_pool_if_needed: Can't get interface by interface name reth2.29



------------------------------
TOMAS
------------------------------

Original Message:
Sent: 11-23-2022 05:23
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi .
Another additional info:
On dhcp server GW interface I can see only this but no response (OUT)
11:20:46.092665 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:20:46.102734 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:21:02.115768 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300
11:21:02.115792 In IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from a4:4c:xx:70:f8:64, length 300

anybody some sugestion?

------------------------------
TOMAS

Original Message:
Sent: 11-21-2022 07:13
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi.

Nobody any suggestion?

Some additional info. If I put manually IP from pool to host. GW is reachable. I tried to deactivate pool and to activate it again but no influence. Still not working...

this is for me weird...:
show dhcp statistics interface reth2.29
Packets dropped:
Total 12770
No available addresses 12770

thanks for any suggestion

------------------------------
TOMAS

Original Message:
Sent: 11-16-2022 01:55
From: TOMAS JUHAS
Subject: Home Lab DHCP not working

Hi Steve,
yes, it is allowed. I am struggling with this, because I can't find anything wrong...

security-zone MANAGEMENT-OFFICE {            description RECEPCE;            host-inbound-traffic {                system-services {                    all;                }                protocols {                    all;                }            }            interfaces {                reth2.29;

        security-zone MEETING {