when looking at the output for
show system processes of an HA router the expected status of each process is
running. Within the router, not all processes have an active and an inactive. The ones that do will indicate a
Y or
N in the
Primary column to show which process is active. Also note that not all active processes need to be on the same node! If the
Primary column is blank for a given process, that means both processes are always active. Here is an example below:
admin@TestNodeA.TestConductor# show system processes router TestRouter
Tue 2019-07-09 19:59:49 UTC
================================ ============================= ============ ========= =======
Node Process Status Primary Role
================================ ============================= ============ ========= =======
TestNodeA.TestRouter accessManager running combo
TestNodeA.TestRouter analyticsReporter running combo
TestNodeA.TestRouter applicationFrameworkManager running combo
TestNodeA.TestRouter conflux running combo
TestNodeA.TestRouter databaseQueryCoordinator running combo
TestNodeA.TestRouter dynamicPeerUpdateManager running N combo
TestNodeA.TestRouter fastLane running combo
TestNodeA.TestRouter highwayManager running combo
TestNodeA.TestRouter nodeMonitor running combo
TestNodeA.TestRouter persistentDataManager running combo
TestNodeA.TestRouter redisServerManager running N combo
TestNodeA.TestRouter routingManager running N combo
TestNodeA.TestRouter secureCommunicationManager running combo
TestNodeA.TestRouter securityKeyManager running N combo
TestNodeA.TestRouter snmpTrapAgent running combo
TestNodeA.TestRouter stateMonitor running combo
TestNodeA.TestRouter systemServicesCoordinator running combo
TestNodeB.TestRouter accessManager running combo
TestNodeB.TestRouter analyticsReporter running combo
TestNodeB.TestRouter applicationFrameworkManager running combo
TestNodeB.TestRouter conflux running combo
TestNodeB.TestRouter databaseQueryCoordinator running combo
TestNodeB.TestRouter dynamicPeerUpdateManager running Y combo
TestNodeB.TestRouter fastLane running combo
TestNodeB.TestRouter highwayManager running combo
TestNodeB.TestRouter nodeMonitor running combo
TestNodeB.TestRouter persistentDataManager running combo
TestNodeB.TestRouter redisServerManager running Y combo
TestNodeB.TestRouter routingManager running Y combo
TestNodeB.TestRouter secureCommunicationManager running combo
TestNodeB.TestRouter securityKeyManager running Y combo
TestNodeB.TestRouter snmpTrapAgent running combo
TestNodeB.TestRouter stateMonitor running combo
TestNodeB.TestRouter systemServicesCoordinator running combo
Please let me know if you have any other questions!
------------------------------
Tyler Carroll
Staff Software Engineer
tcarroll@128technology.com------------------------------
Original Message:
Sent: 07-09-2019 13:16
From: Victoria Smiley
Subject: HA Router pair and Conductor status
HI -- Great to hear from you. should be able to give you some information.
------------------------------
Victoria
Original Message:
Sent: 07-09-2019 11:59
From: Alan Wright
Subject: HA Router pair and Conductor status
Hi Folks,
I would like to know what the expected status on the conductor if a an HA router is connected to the conductor, where node1 is active and node2 is standby?
Should both nodes show as running? If not what status should we see?
Alan
------------------------------
Alan Wright
LEATHERHEAD
+44 (0) 20 7043 6127
------------------------------