Hi,
I have a couple of access-ports in a vlan (on an EX3300 running 12.3R7.7, one particular port should only allow traffic from specific ip-addresses.
I thought that would be straight forward so i configured it like this:
> show configuration firewall family ethernet-switching filter server-oob
term oob-access {
from {
source-address {
10.146.77.15/32;
172.16.18.44/32;
}
}
then accept;
}
> show configuration interfaces ge-1/0/26
description "Server OOB";
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members s-oob;
}
filter {
output server-oob;
}
}
}
So the servers OOB port is connected to ge-1/0/26 and the addresses that should be allowed access to that interface is coming from other vlans.
When i commit this all traffic stops to that interface, why is that? And why is the traffic from the specific addresses not allowed?
If i remove the filter on the port, traffic flows fine.
Kind Regards