vMX

 View Only
last person joined: yesterday 

Ask questions and share experiences about vMX.

  • 1.  FBF questions

    Posted 09-26-2023 22:21

    I have the following topology


    What I need is when the traffic sourcing from 172.16.2.X, the next hop is 10.50.1.25,  otherwise, the next hop is via the default route,

    set firewall family inet filter NAT-PBR term 1 from source-prefix-list net-172.16.2.0/24
    set firewall family inet filter NAT-PBR term 1 then count nat-Traffic
    set firewall family inet filter NAT-PBR term 1 then next-ip 10.50.1.25/32
    set firewall family inet filter NAT-PBR term 1 then accept
    set firewall family inet filter NAT-PBR term 2 then accept

    set  interfaces ge-0/0/6 family inet filter input  NAT-PBR

    When the traffic sources from 172.16.2.X, I can see the count increasing, but traffic still goes to the default.

    Any ideas ? 

    thanks !!