Hi to everyone.
I have next situation. I set export policy for bgp session as:
set protocols bgp group EDGE type internal
set protocols bgp group EDGE local-address x.x.x.x
set protocols bgp group EDGE family inet unicast
set protocols bgp group EDGE family inet-vpn any
set protocols bgp group EDGE family route-target
set protocols bgp group EDGE authentication-key "$xxxx"
set protocols bgp group EDGE export pol-announce-internal
set protocols bgp group EDGE neighbor x.x.x.x
set protocols bgp group EDGE neighbor x.x.x.x
set protocols bgp group EDGE export pol-announce-internal
set policy-options policy-statement pol-announce-internal term temporary then reject
After it all IPv4 from default table where injected into my MX from routereflector but no L3VPN updates in my VRFs!!!! However my own VRF routes were exported!!! When I deleted export policy from BGP everything starts working. It seams that families for BGP are somehow influenced by this export policy. Please explain if somebody knows what is the reason. Thanks.