Hi all,
we have a Virtual-Chassis containing 3 EX4300 (no mixed, no multi-gigabit) connected by the QSFP-Ports.
The Virtual-Chassis is preprovisioned. The QSFP-Ports are in default-state, which mean they are all intened to be used for building a VC.
Now we have the 2 issues:
By doing a show system partitions media internal, the system shows a "error: /dev/da0s1a is not a JUNOS snapshot" on the fpc0.
Also when doing a show system storage partitions, the system has mixed up da0s1a and da0s2a:
fpc0:
--------------------------------------------------------------------------
Boot Media: internal (da0)
Active Partition: da0s2a
Backup Partition: da0s1a
Currently booted from: active (da0s2a)
JATC recommend to do a format install on fpc0 to get the system back into normal state.
Can you please confirm the follwoing procedure:
- Shutdown fpc0 and disconnect VC-Cables
- Boot into loader-promt
- Do a format-install by usb
- Boot the fresh installed Switch
- Check System-Partitions / create a system snapshot
- Shutdown the switch
- Reconnect the VC-Cables
- Power on the Switch
- After the switch has powered on, it should assign itself backup into the VC
Is this procedure correct ?
BR, Christoph.