Hi,
I am new to Juniper and EX switches. I am trying to use the mangement port at the back of the switch. The me0 port is configured as follows and also i have a default route set but unable to even ping the default gateway. The me0 port is connected with the LAB switch. What am i missing ? (attached the switch config)
Thanks in advance for help.
MSC
[edit interfaces me0]
unit 0 {
family inet {
address 172.25.8.73/24;
}
}
[edit routing-options]
static {
route 0.0.0.0/0 next-hop 172.25.8.1;
}
[edit routing-options]
SW1# run ping 172.25.8.1
PING 172.25.8.1 (172.25.8.1): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
^C
--- 172.25.8.1 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
[edit routing-options]