Hi,
Tried to conifgure an inet interface with vlan-tagging enabled. Since it is necessary to associate the unit with a vlan-id if vlan-tagging is enabled, tried to bind it to vlan 0. However, got the messgage- error: Value 0 is not within range (1..4094). I found that vlan 0 is a reserved vlan, but if the same steps are peformed on an MX box, the commit goes through successfully. Any idea what could be the reason behind different behaviour on different devices? Will the MX device with vlan-id 0 work?
QFX:
====
elit3-sys# show interfaces
xe-0/0/18:2 {
vlan-tagging;
unit 0 {
family inet {
address 40.0.0.1/24;
}
}
}
{master:0}[edit interfaces xe-0/0/18:2]
elit3-sys# set unit 0 vlan-id 0
error: Value 0 is not within range (1..4094)
MX:
===
nickelbase# show interfaces
xe-4/1/16 {
vlan-tagging;
unit 0 {
vlan-id 0;
}
}