Hi,
We have a new EX4200-48T switch. Issued the operational mode command "Request system halt" and then rebooted. After the reboot, it does not recognize any of the Ethernet ports and shows the following error in config:
"Warning: statement ignored: unsupported platform (ex4200-48t)"
Also, It does have the old config on it, but does not seem to be using it. Tested telnet on me0 interface and it fails. However telnet from this switch to any other device works.
Rebooted the switch couple of times, but it still gives the same warning.
root@switch> show interfaces terse
Interface Admin Link Proto Local Remote
bme0 up up
dsc up up
gre up up
ipip up up
lo0 up up
lsi up up
me0 up up
me0.0 up up inet 10.32.4.51/23
mtun up up
pimd up up
pime up up
tap up up
root@switch# show interfaces
ge-0/0/0 {
unit 0 {
##
## Warning: statement ignored: unsupported platform (ex4200-48t)
##
family Ethernet-switching;
}
}
ge-0/0/1 {
unit 0 {
##
## Warning: statement ignored: unsupported platform (ex4200-48t)
##
family Ethernet-switching;
}
Any help will be really appreciated.