Switching

Hi, evyerone

I downloaded a JUNOS 10.0 and tried to transfer it to EX-4200 by ftp

but i got a message as the below

ftp> get jinstall-ex-4200-10.0R1.8-domestic-signed.tgz
local: jinstall-ex-4200-10.0R1.8-domestic-signed.tgz remote: jinstall-ex-4200-10.0R1.8-domestic-signed.tgz
200 PORT command successful.
150 File status OK ; about to open data connection
 76% |**************************************            | 80575 KB    00:06 ETA
/: write failed, filesystem is full
 79% |***************************************           | 83518 KB    00:05 ETAftp: local: jinstall-ex-4200-10.0R1.8-domestic-

signed.tgz: No space left on device
 79% |***************************************           | 83518 KB    00:05 ETA
226 Closing data connection; File transfer successful.
85522432 bytes received in 22.51 seconds (3.62 MB/s)

Software is 102MB. is it downloaded full size?

How can i get more space in Switch?

Help me out please

Thanks

Jeff D. LEE

Hi Jeff

If you type the command "show system storage" you will see the available space under your system.

If you want to make some space around you can use the command "request system storage cleanup" to erase some unusefull files.

But mainly I would advise you to download the software file under the /var/tmp directory.

so in your case try this command

get jinstall-ex-4200-10.0R1.8-domestic-signed.tgz    /var/tmp/jinstall-ex-4200-10.0R1.8-domestic-signed.tgz

Hope this will help you

Regards

Thanks again!!! 😄

i appreciated that your help!!!

Jeff D. LEE