Hi,
I whant to run a throughput test between 2 QFX-5100.
I enabled the RPM on both of the machines,
I made the following configurations:
NITIATOR/TERMINATOR
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT test-type throughput
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 4016
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 1518
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT bandwidth-kbps 100000
set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-profile RFC2544-THROUGHPUT
set services rpm rfc2544-benchmarking tests test-name TESTE-1 mode reflect
set services rpm rfc2544-benchmarking tests test-name TESTE-1 family inet
set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-udp-port 4001
set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-udp-port 4001
set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-iterator-duration 120
set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-interface irb.3688
set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-ipv4-address 192.168.200.2
set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-ipv4-address 192.168.200.1
REFLECTOR:
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT test-type throughput
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 4016
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 1518
set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT bandwidth-kbps 100000
set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-profile RFC2544-THROUGHPUT
set services rpm rfc2544-benchmarking tests test-name TESTE-1 mode initiate-and-terminate
set services rpm rfc2544-benchmarking tests test-name TESTE-1 family inet
set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-udp-port 4001
set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-udp-port 4001
set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-iterator-duration 120
set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-ipv4-address 192.168.200.1
set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-ipv4-address 192.168.200.2
But I can't find the commad to activate it.
The commad test services rpm rfc2544-benchmarking test TESTE-1 start does not exsits on QFX and I can't finad any commnad to activate it.
Does some know how to activate rfc2544 on QFX ?
Thanks