You might also like the operational command that will give you an overview of all your zones
show security zones
Or specific zones as in your case
show security zones Dedicated-Untrust
------------------------------
Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
http://puluka.com/home------------------------------
Original Message:
Sent: 06-04-2023 02:42
From: Rakesh A
Subject: Doubt about Zone Configuration
Hi Guys,
I have a one doubt,
My firewall configuration look like below,
security-zone Dedicated-Untrust {
interfaces {
reth1.0 {
host-inbound-traffic {
system-services {
all;
}
}
}
st0.2;
reth0.10 {
host-inbound-traffic {
system-services {
all;
1.My Doubt is Dedicated-Untrust Zone is belongs to reth1.0,st0.2 and reth0.10.
Please clarify about this.
REgards
Rakesh
------------------------------
Rakesh A
------------------------------