Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  Does EX-4600-40F support EVPN Multihoming using ESI-LAG

    Posted 12-17-2023 06:05

    Hi Team,

    Planning to move from virtual chassis to ESI-LAG on EX4600-40F. Is is even possible? does the platform support ESI-LAG?



    ------------------------------
    VIVEK SINGH
    ------------------------------


  • 2.  RE: Does EX-4600-40F support EVPN Multihoming using ESI-LAG

    Posted 12-17-2023 06:13

    You can use the Juniper Feature explorer tool to see which platform and Junos version supports a feature.

    This is Simplified configuration for ESI LAGs with EVPN dual-homing, which does NOT include ex4600

    https://apps.juniper.net/feature-explorer/feature-info.html?fKey=12039&fn=Simplified+configuration+for+ESI+LAGs+with+EVPN+dual-homing

    If you are looking at different elements of ESI LAG you would use the search or platform browse.

    https://apps.juniper.net/feature-explorer/search.html?q=esi%20lag



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: Does EX-4600-40F support EVPN Multihoming using ESI-LAG

    Posted 12-17-2023 10:59
    Hi Vivek,

    I knew the 4400 series did the ESI-LAG, so presumed the 4600 would, but I’d go off the link Steve has provided as on here the 4600 doesn’t support this feature.

    Apologies, I was also not aware of this portal so thanks Steve for that!

    Ethan


    Original Message


  • 4.  RE: Does EX-4600-40F support EVPN Multihoming using ESI-LAG

    Posted 12-17-2023 06:28

    Hi Vivek,


    I do believe the EX4600 should be able to support ESI-LAGs. 


    However, I'm not able to see much online other than this video I've copied below to configure ESI-LAG on a Juniper device; it may be worth following this and the commands to see if the EX4600 supports the ESI-LAG: 



    If this doesn't work, it might be checking this article from Juniper to see if this CLI syntax is what you need:

    HTH,

    Ethan




    Original Message