Hello All,
We are trying to configure L2VPN between two PE routers (Cisco and Juniper), the configuration was successfull for the "inet over TCC" (configuration below):
juniperlab> show configuration interfaces so-0/2/0
dce;
speed oc3;
encapsulation frame-relay-tcc;
framing {
sdh;
}
lmi {
lmi-type ansi;
}
sonet-options {
rfc-2615;
}
unit 512 {
encapsulation frame-relay-tcc;
dlci 512;
}
juniperlab> show configuration protocols l2circuit
neighbor 5.5.5.5 {
interface so-0/2/0.100 {
virtual-circuit-id 100;
}
interface so-0/2/0.512 {
virtual-circuit-id 512;
mtu 1700;
}
}
Now two questions:
1- On the Juniper PE, can we configure a family inet unit under a different unit under the same physical interface?,
I configured it already but not yet tested it:
2- Can we configure the LDP L2vpn to carry Ethernet over TCC (or Ethernet interworking in Cisco wording)?
I added "encapsulation type ethernet" under protocol l2circuit neigbour interface so-0/2/0.512 but not yet tested.
Thanks in advance...